Polymaker PolyMide CoPA 3D Printer Filament, Nylon Filament, Natural Color, 1.75 mm Filament, 750g


Specifics

Color: Natural

Diameter (Tolerance): 1.75 mm ± 0.02 mm

Net Weight: 750g

Recommended Printing Temp: 250 – 265 °C

Recommended Printing Speed: 40 – 60 mm/s

Heated Bed: up to 70 °C

Printing Instructions

Similar to other Nylon materials, PolyMide CoPA has high sensitivity to moisture and should be kept at dry conditions (relative humidity of 20% or less) at all times. We recommend that the material be used with PolyBox (purchased separately).

Moisture-absorbed filament exhibits higher level of stringiness and uneven layers during printing. In case of this happening, the filament can be dried at 70-90 °C for 6-8 hours. However extensive drying can lead to thermal degradation and should be avoided.

For optimum bed adhesion, treat the print bed with a glue stick (Elmer’s or similar brands) before printing. It will also ensure an easy release after printing.

The model cooling fan should be turned off during printing. A retraction distance of 3-6 mm and retraction speed of 2400-3600 mm/min is recommended. The ideal environmental temperature during printing is between 40-70 °C.

For more details or technical questions regarding the use of our products, please leave a message, we will come back to you within 24 hours.

About Polymaker

Polymaker is a ISO9001:2008 certified, 3D printing innovation company dedicated to enabling a better future with 3D printing. We achieve this goal by integrating advanced materials, additive manufacturing technologies, and design to meet the needs of today’s industries and consumers.

Product Features

  • Warp Free: PolyMide CoPA is engineered to give excellent dimensional stability during printing, with near-zero warping
  • Easy Printing:Unlike other Nylon filaments, PolyMide CoPA is extremely easy to work with. It is compatible with most filament-based 3D printers with no heated chamber/bed required!
  • Strong & Tough: The outstanding mechanical strength and toughness makes PolyMide CoPA the best choice of engineering material for your creative ideas!
  • Heat Resistant:With a high softening temperature of ~180 °C, PolyMide CoPA is one of the most heat resistant Nylon 3D printing materials in the market.

Check Out Our Website For Details…

Polymaker PolyMax PLA 3D Printer Filament, Jam-Free and 9 Times Stronger Than Regular PLA, 3D Printing Filament. PolyMax PLA (1.75, 750g) True Purple

Check Out Our Website For Details…

Polymaker PolySupport 3D Printer Filament, PLA Support Filament, 1.1 lb (0.5 Kg), 2.85 mm

Specifics and Printing Conditions Color: Pearl White Diameter (Tolerance): 2.85 mm ±0.05 mm Net Weight: 1 Kg ± 20g Recommended Printing Temp: 230 – 240 °C Recommended Printing Speed: 45 mm/s Heated Bed: 80 °C All PolyLite PLA filaments have been properly dried before packaging and shipping. It is recommended that the filament, when not used, be stored in the provided resealable bag with the desiccant pack to minimize moisture absorption and to ensure the best printing performance. About Polymaker Polymaker is a ISO9001:2008 certified, 3D printing innovation company dedicated to enabling a better future with 3D printing. We achieve this goal by integrating advanced materials, additive manufacturing technologies, and design to meet the needs of today’s industries and consumers.

Product Features

  • Single & Dual Extruders: PolySupport can be used on single extrusion printers as both the support and modeling material, while also used as a dedicated support material on dual extrusion printers.
  • Quick & Easy: The secret behind PolySupport is the inter layer adhesion. PolySupport is strong enough to support the structure, while breaking away readily by hand, no power tools or complicated processes needed.
  • Clean Breakaway: PolySupport doesn’t bond to your model, it supports it. This means the surface of your model is unaffected once the support has been removed.
  • Freedom of Creation: Never again let overhang angles over 45° escape your design. With PolySupport you have the freedom to explore new geometry, safe in the knowledge that PolySupport will work perfectly every time

Click Here For More Information

Polymaker PolySmooth 3D Printer Filament, Layer-Free 3D filament, Snow White, 1.75 mm Filament, 750g 3D Printing Filament

Descriptions
Specifics

Diameter (Tolerance): 1.75 mm ±0.05 mm

Net Weight: 750g

Recommended Printing Temp: 190 – 220 °C

Recommended Printing Speed: 40 – 90 mm/s

Heated Bed: up to 70 °C

Printing Instructions

PolySmooth 3D filament can be printed under similar conditions as regular PLA filament.

Prints made with PolySmooth can be post-processed using the Polysher (purchased separately) and alcohol to dramatically increase the smoothness of the surface.

PolySmooth works well with commonly available build surfaces. To improve first layer adhesion, coat the build surface with a thin layer of PVA glue (using a glue stick), or heat the HBP (if equipped) up to 70 C.

PolySmooth is sensitive to moisture. It is recommended that the filament, when not being used, always be stored in the provided resealable bag with the desiccant pack to minimize moisture absorption and to ensure the best printing performance.

For more details or technical questions regarding the use of our products, please leave a message, we will come back to you within 24 hours.

About Polymaker

Polymaker is a ISO9001:2008 certified, 3D printing innovation company dedicated to enabling a better future with 3D printing. We achieve this goal by integrating advanced materials, additive manufacturing technologies, and design to meet the needs of today’s industries and consumers.

Having served a large number of industrial clients across a wide variety of industries, we launched Polymaker Industrial to customized high-quality, reliable materials to meet the growing needs of 3D printing in the industrial sector in 2017.

Contact us if need further information about Polymaker Industrial.

Product Features

  • Layer-Free: PolySmooth 3D printer filament is the first 3D printable filament engineered for layer free post-processing. We have specifically developed PolySmooth to work alongside the Polysherproviding the solution to dramatically improve the surface quality of 3D printed objects. (The smooth surface can only be achieved by polishing the PolySmooth prints in Polysher)
  • Easy to Print:PolySmooth 3D filament is compatible with all filament-based 3D printers and prints under similar conditions as PLA filament. Featuring a wide printing temperature range, low odor and no heated bed required, PolySmoothTM is the perfect companion to your desktop 3D printer.
  • Safe and clean: PolySmooth 3D filament is compliance with RoSH,REACH,PAHs.
  • Optimized for Support: We have taken our experience from PolySupport and engineered PolySmooth with the same support removal properties. Easily break away support from PolySmooth’s surface and once your model is polished there is no scar left on the surface.
  • Balanced Mechanical Properties: PolySmooth 3D filament features well balanced mechanical properties, outperforming ABS and PLA filament on most attributes, making it an ideal material for everyday 3D printing

Check Out Our Website For Details…