Details: Dimensions: 60*50mm
Net Weight: 40g
Max Current: 25A(Enhance heat dissipation)
Wire’s color is random
1. Remove basically all ouside screws for your anet a8 control box
2. Take pictures of existing board wiring
3. Unscrew two large 12/14GA wires on the board labeled “hot bed”
4. Screw these two wires into the new mosfet board labled “hot bed”
5. Connect the small jumper wires (white) to the control board where you just removed the two wires and screw them down. Note the polarity on each board. Match (+) to (+) and (-) to (-)
6. FInd 2x 6-8″ pieces of 12 or 14 AWG wire. Most cheap extension cords are 16AWG (too thin). Your local home depot / menards / ace will have this as cut-to-length
7. Run one of the 6″ wires to the power supply (+), screw in; and the other side to the (+) DC IN on the new mosfet board. Repeat for the negative wire (-) to (-)
8. Many people use velcro to secure the new board to the top of the control box. Others print off a holder from thingiverse
9. Put everything back together
10. When complete, you’ll see a blue light activate for signal from inside the box when the bed heater is activated by the control board
2xHot bed MOS Tube Power Module Expansion
- Work with anet a8 3d printer heat bed
- Completely solve the hot bed power is too large and the load current issue
- Under the premise of normal cooling, it work stable under I(Max)=25A, the current must not exceed 25A while the process working
- General Add-on Heated Bed Power Expansion Module
- Note: Any issue please contact us before, we will always here to help!
Detailed Information available on our Homepage…
– Watts: 350W
– Input Voltage: AC110V-220V
– Output Voltage: DC 12V
– Output Current: 29A
– Frequency: 50/60Hz
– Shell Material: Metal case
– Working Temperature:0~40 degrees celsius
– Storage Temperature: -20~60 degrees celsius
– Only indoor use, non-waterproof.
– High quality material, durable and safety in use.
– Great switching power supply for home appliances.
– A new style Switching Power Supply which can keep the voltage stability.
1. When the power supply is working, please do not touch it.
2. This product is suitable for indoor use, non-detachable power shell.
3. Please DO NOT let the unit work long hours over rated current! Normally it is better to work under 80% of rated current.
4. External power supply round hole mesh heat vents, in the range of 50cm within the outlet,do not place other flammable items.
- High safety performance, with short circuit, overload, over voltage, protection function.
- The DC ripple is small, the power supply efficiency is high, and the electromagnetic interference is low.
- Low working temperature, long service life. Wide input voltage range, in line with global standards.
- Compatible with 110V/220V, need to adjust the switch before use, select the correct input voltage stalls.
- High quality Switch Power Supply widely used in Industrial automation, LED display, communications, etc.
Click Here For More Information
So many 3D pen on the market, why choose our 3D pen?
2017 Upgraded Version New generation KT-PRASE 3D pen，In the previous generations of pen on the basis of more perfect, more stable performance, the operation is more simple, 3D pen Help Kids developing artistic skills, spatial thinking, to encourage kids’ creative imaginations.
Power parameter:5V 2A
3D Pen is suitable for both 1.75mm ABS & PLA Filament. We recommend using 1.75mm PLA filament,which is more eco-friendly,PLA Filament is non-toxic and odorless,safer ,and tend to be widely-used filaments
Ceramic Nozzle much safer compared to copper nozzle from other manufacturers,safe and toxic free
❤To Prevent Clogging:
If the blockage, the pen section of the front area to open, and then the pen inside the supplies taken out on the line, easy to operate
Failure to follow these warnings can result in injury or product damage.
√This equipment is suitable for children and adults, children need to be used in the adult in the adult guardianship
√Do not touch the extruding nib (nozzle) during use.and Do not touch the nozzle before the 3D printing pen has time to cool.
√The nozzle and its vicinity are high temperature danger areas, so it is strictly forbidden to touch, or touch the other items with a pen tip during use
√PLEASE unload the filament after use and turn off the power.
❤ KT-PRASE Service guarantee
Kentprase devotes providing the best product and service to customers.
If you have any questions or concerns for this 3D pen, Please contact us,Thank you.
1 x 3D Printing Pen
1 x Operation instruction booklet
1 x Power Adapter
1 x Power cord
1xMulti-Color 20 Meters 1.75mm PLA Filament
- ❤SUPPORTS MOBILE POWER-This 3D pen supports mobile power supply, anywhere can use mobile power, more secure, more convenient, and sometimes you want to use the pen, but can not find the power outlet, this time you can use mobile power supply, At any time you can carry out your creation
- ❤PLA/ABS FILAMENT- This 3D printing pen is capable of using 1.75mm PLA and ABS filame, PLA Filament is non-toxic and odorless,safer ,and tend to be widely-used filaments.Please do not use with PCL filament.
- ❤CONTROL SPEED-Printing speed: 0-120cm / min,This 3D printing pen is light and slim, easier to handle. you can crank up the extrusion speed for larger fill in areas and turn it down slow to create intricate works of art Adjustable feed lets you regulate speed & flow for optimal control of material,So that the operation more stable and more convenient
- ❤ADJUSTABLE TEMPERATURE- Working temperature,60-245℃,This 3D printing pen has hot melt extrusion molding and allows you to easily adjust the temperature in one degree increments from 60C to 245 ℃. You can keep track of the current temperature by looking at the convenient OLED display for optimal fine-tuning.
- ❤EASIEST 3D PRINTER PEN – ONE BUTTON CONTROLS EVERYTHING, Ergonomically designed 3D drawing pen is easiest to handle, and simplest to operate, making designing brilliant 3d art childs play! Simply pick it up, click the button.Ceramic nozzle releases filament exactly where you want it. Then click it again to pause! the system automatically standby, if no operation within 2 minutes, the system automatically sleep, so more secure and convenient!
Click Here For More Information
Homecube 3D printing pen is suitable for both kids and adults,no matter creating 3D models, 3D scribbler printing, doodle model making or drawing interesting things.
It can help children and adults to improve spatial thinking ability, to encourage their creative imaginations.
Homecube 3D printing pen can be heated directly with mobile power,make it more convenient to use.
Currently on the market commonly used power model capacity is 3350MAH,5200MAH,10000MAH,13000MAH. The 3D pen can be separately normally used for 60 minutes, 100minutes, 180 minutes,230 minutes.
Use:3D pen,DIY drawing
Supplies type:ABS / PLA
Adjustable heating temperature range : PLA(185-195℃), ABS(210-220℃)
Speed of extrusion:adjustable 1-4 file
Power supply:DC 5V/2A
1 x 3D Pen
1 x Power Adapter
1 X Pen cap
1 x Supplies
1 x User manual
1. The pen is suitable for children over 8 years old and adult. It can be used by children under the guardianship of adults.
2. Front near the tip and the device for high temperature danger zone, so it is forbidden to touch or use the pen point touch other items.
3. It is prohibited to insert foreign body into the entry hole.
4. Keep the pen away from water or any other liquids.
5. Prevent falling from high altitude place or away for kids’ touch.
- IMPROVE SPATIAL THINKING ABILITY: Homecube 3D pen is a great tool for anyone interested in 3D modelling. It is a great gift for any occasion.The only limitation of 3D drawing is your imagination.Homecube 3D printing pen is perfect for children above 6 yrs old and adult no matter you are artists, hobbyist or creative lovers.
- HUMANIZED DESIGN AND POWER SUPPLIER:Two materials choices,support shift between PLA and ABS.Connect with power supply through USB cable,can be driven by power bank,computer,laptop and ect.,make it more convenient to use.No matter where you are,just enjoy it.Display screen can directly show the information like supplies type, speed, temperture and safe warning. Aviation ceramic nozzle material make it safer while using.
- SMART OPERATION: Support dual-mode for feeding,Hold the “Forward” button to feed continuously and release to stop feeding, or double press the “Forward” button to feed continuously and press again to stop feeding.1-4 file adjustable discharging speed.Long press “Return” button for 2 seconds to return the supplies automatically.
- INTELLIGENT SLEEP: The device will enter into sleeping mode automatically and the screen will display “SLEEP” when the device is not used more than 3 minutes. If you need to use it again, press “Forward” button to trigger it.
- WARRANTY: 24 hours email customer service support.30 days free return/replacement.
Check Out Our Website For Details…