This AC Adapter Replacement for LCD Monitor, LED Strip Light, Computer Project, CCTV Cameras, Coffeemaker, Air Cleaner, 3D Printer, Massage Instrument, Wireless Router, Fingerprint Machine and other Low Voltage Device
- Power Input: AC110-240V Worldwide Input Voltage, Please verify carefully that the DC Output (12V 4A) and connector Tip size (in the pictures) match your original adapter before purchasing.
- Charge with ultra reliability prevents your LCD Monitor, TV or LED strip lights from overcharging, short circuit, and electronic shock; High energy efficiency – friendly to the environment.
- OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection).
- Kastar AC adapter perfect replacement for your original adapter with the highest quality standards for ultimate reliability.
- Package includes: 1 x Kastar LCD AC Adapter, 1 x 3-Prong extended Power Cord, 1 x Kastar Feedback Card.
Detailed Information available on our Homepage…
Basic requirements: 12V 30A 360W
Rated voltage range: 110-220VAC
Input voltage range: 110-220V
Input frequency range: 47 ~ 63Hz
Input voltage protection: 115 ~ 150% intermittent mode
Input voltage recovery: automatic recovery
Impact current: ≤1%
Machine efficiency: ≤ 0.5%
Output voltage range: 12V ± 0.5%
Output current: 30A
Ripple and noise: ≤100 mVp-p
Rise time: ≤50ms
Voltage regulation rate: ≤0.5%
Load regulation: ≤1%
Output over-current protection: current sag type
Output short circuit protection: IGBT
Output over-voltage protection: soft-start protection
Insulation resistance: > 50MΩ
High-quality materials, heat-resistant, dust-proof and moistureproof, flame-retardant, built-in cooling fan, safe and reliable, can guarantee better cooling effect, the service life of up to 20,000 hours
* This product is not waterproof, please be careful when you use it.
* This Power Supply is only suitable for indoor use, non-detachable power shell.
* Don’t place other items in the product range of 5 cm, to ensure the powersupply with good thermal environment and safety.
* Carefully verify the power link is correct rigorously, power lines reversed before use it. Don’t touch the case during the power is working.
* Don’t place other items in the product range of 5cm, in the range of 50cm within the outlet Do not place other flammable items.
* Do not short-circuit output if no output, please use off one minute re-energized.
* Professional installation of qualified electrician is highly recommended.
* If the power supply is defective, please contact us at first.
1 * 12V 30A Power Supply
- Dimensions: 21.5 * 11.5 * 5.0 cm /8.46*4.53*1.97 inch (L*W*H)
- Operating temperature: -10 ℃ ~ +50 ℃, 20% ~ 95% RH (no condensation)
- Storage temperature: -20 ℃ ~ +85 ℃, 20% ~ 95% RH (no condensation)
- Temperature coefficient: 0.02 ~ 0.05% / ℃
- Cooling method: fan cooling
Click Here For More Information
Most students will work with a plastic when making things with a 3D printer, but that is only scratching the surface of materials that can be used in these machines. This book takes a look at the different materials that can be used by 3D printers, what those materials can make, and the advantages and disadvantages for each.
Check Out Our Website For Details…
Elegoo Inc. is a professional manufacturer and exporter that is concerned with the design, development production and marketing of arduino, 3d printers, raspberry pi and STM32.
Our Dream is to make the best price and best quality produce for customers.
So we would like to receive your valuable suggestions for our products and we can improve them for you.
1pcs UNO R3 Controller Board
1pcs LCD1602 Module ( with pin header)
1pcs Breadboard Expansion Board
1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V
1pcs Joystick Module
1pcs IR Receiver
1pcs Servo Motor (SG90)
1pcs Stepper Motor
1pcs ULN2003 Stepper Motor Driver Board
1pcs Ultrasonic Sensor
1pcs DHT11 Temperature and Humidity Module
1pcs 9V Battery with DC
1pcs 65 Jumper Wire
1pcs USB Cable
1pcs Active Buzzer
1pcs Passive Buzzer
1pcs 5V Relay
1pcs Tilt Switch
5pcs Button (small)
1pcs 1 digit 7-segment Display
1pcs 4 digit 7-segment Display
5pcs Yellow LED
5pcs Blue LED
5pcs Green LED
5pcs Red LED
1pcs RGB LED
2pcs Diode Rectifier (1N4007)
2pcs NPN Transistor (PN2222)
1pcs IC 74HC595
10pcs Female-to-male Dupont Wire
- Free PDF tutorial(more than 22 lessons) and clear listing in a nice package
- The most economical way to starting Arduino programming for those beginners who are interested
- Lcd1602 module with pin header (not need to be soldered by yourself)
- This is the upgraded starter kits with power supply module, 9V battery with dc
- High quality kite with uno R3, 100 percent compatible with Arduino uno R3
Click Here If You Need More Detailed Info…