KIMME 2040 Aluminum Profile Y Timing Belt Stretch Straighten Tensioner Tronxy V-sloa Accessories 3D Printer Accessories (Random Color)

KIMME 2040 Aluminum Profile Y Timing Belt Stretch Straighten Tensioner Tronxy V-sloa Accessories 3D Printer Accessories (Random Color)

Detailed Information available on our Homepage…

Anycubic POT015 LCD Uv 405 nm Rapid Resin for 3D PRINTER-500Mll/ 500G-White (Bottle Random)

Note: Two kinds of bottles with same 500g resin will be send randomly.Parameter information:Size: ~500g/500mlColor: WhiteMain material: resin monomer, photo initiatorExposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15sWarranty: 12 monthsResin parameters:Solidify wavelength: 405nmHardness (D): 79.0Viscosity (25C): 552.0 mpa. sLiquid density: 1.100 g / cm3Solid density: 1.184 g / cm3Flexural strength: 23.4 MpaTensile strength: 23.4 MpaElongation frequency: 14.2 % Precautions: 1. Storage1) Keep away from light and sealed at room temperature. (Sunshine contains a certain amount of UV light which would solidify photosensitive resin. Inside the machine, the ANYCUBIC resins would not be affected for over 48 hours if it is not UV light)2) It is recommended to store the resin under 15C -35C in a sealed container. Avoid any dusty or moist environment. 2.Usage:1) Shake well before use. Avoid any direct sunlight during usage. 2) Do not put in the mouth. Keep it away from the children.3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.4) For accidently contact, please wash by plenty of water immediately. Seek medical advice if necessary.5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds and post cure process may be needed for higher hardness.6) Please filter the residual resin in vat back to the container if it would not be used over 48 hours. Polluted residual resin would cause printing issues. 3. DLP printer how to choose corresponding UV resin.Before choose the ANYCUBIC resins for your own 3D printer, please confirm that the UV wavelength of your 3D printer is 405nm. We may not responsible for any damages caused by incorrect use of the resin.

Product Features

  • Specifically designed for led light source to achieve better printing quality
  • Rapid prototyping. The resin has been developed to reduce the forming time
  • Strong adhesion. The adhesion has been improved for higher print success rate
  • Appropriate toughness. Anycubic uv resins have good combination of hardness and toughness, which brings easy removal of the POT015 and fine printing details
  • Great stability. After cured, Anycubic uv resins show good stability in moist and corrosive environment

Check Out Our Website For Details…

Ksera 3D Pen, 3D Drawing Printing Printer with 150 Feet 12 Colors (1 Glow)+3 Colors Random PLA Filament Refills 3D Drawing Stencils for Kids & Adults Art Crafts DIY, LCD Display

1.[Package Include]
1*3D Pen
1*Power Adapter
1*Manual
150 Feet PLA are in the Pen Box, 12 Colors (1 Glow)- Vacuum Compressed in 12 Transparent Bags, 3 Color (Random) – Vacuum Compressed in One Bags to Keep PLA Dry and Fresh
2* Finger Stall
1*3D Drawing Stencils (10 Pattern)
1* PVC Drawing Board

2.[Operation manual]
a.Plug in the power adapter, the yellow LED light means that it is in service mode.
b.The small LCD screen will display “PLA” or “ABS”, choosing the correct material, press the “load Filament Button”, and the red LED light will be on, which means the pen is in preheat mode and the temperature display will reflect the real temperature. When the red light turn green, means that the pen is ready to be use.
c.lnsert the filament (the filament head should be flat)in the hole that fits and use your other hand to press the “Load Filament Button”, until a small amount of plastics comes out, then the pen will be ready.
d.Take on the finger stalls which can effectively prevent hot. Drawing on the PVC Drawing Board.
e.when finish drawing, first press the “load Filament Button”, wait the filament come out, and then press the “unload Filament Button”, please make sure the filament is out, otherwise the nozzle will be block.

3.[Specification]:
Material used: ABS/PLA φ1.75mm
Nozzle hole size:0.7mm
Melting temperature of material: ABS(210℃-235℃ ) PLA (160℃-210℃ )
Adapter current:110V-240V 2A
Pen electric spec:DC12V 2A 24W
Pen size:184mm*31mm*46mm

4.[Tips]:
-before insert the filament, please use the scissors to cut the filament head flat.
-if the pen is idle by 2 minutes, it will go in to stand by mode, The working light will be off, and the LCD will display SLEEP. To recover from the sleep mode, just press the forward button.

Product Features

  • ✔️ Perfect Gift for Kids & Adults:Ksera’s 3D printer pen gives you a new way to draw, bringing your art ideas to reality. It is a perfect gift for kids that helps children to improve spatial thinking, cultivate creation and artistic skills. It’s also a great way for parents and children to spend quality time together.
  • ✔️ Easy to Use : We have combined anything you need for 3D drawing in the pen box. Just simply plug-In, heat up, insert the filament and draw. No matter you are a new learner or a expert, you can master it easily. If the pen is idle by 2 minutes, it will go in to stand by mode.
  • ✔️ Adjustable Temperature and Speed : This 3D printing pen is compatible with both PLA and ABS. We bonus 150 feet PLA filament. Compared to ABS, the PLA filament is more eco-friendly and safer. The LCD screen clearly display the temperature of material, you can adjust the temperature according to the material you use. Besides, the speed controller can help you to increase or decrease the speed of extrusion.
  • ✔️ Package Include :1*3D pen, 1*power adapter,12color (1 Glow)+3 color-random*10 feet length PLA filament,1*pen holder,2* finger stall,1*3D drawing stencils (10 pattern)
  • ✔️100% Satisfaction Guarantee : Shop with us, 100% satisfaction is guaranteed. 3D Pen come with 30-day money back guarantee . If there are quality problems in case of normal use.

Click Here For More Information

3D Printing Pen 2nd Generation with LCD Screen, 4 Random Filaments, Spatula, Silicone Mat, Dock, Adapter, Keychain and Manual Summer Edition By Nextstors

GET THE 2Dream 3D PRINTING PEN SET!

THE 2Dream 3D PEN’S TOP BENEFITS:

2ND GENERATION – The best on the market today
LCD DISPLAY – View temperature & filament type
SINGLE FINGER USE – Regulate speed & flow of filament
TEMPERATURE RANGE – 160-230 adjustable degrees
SHUTS OFF – After 5 minutes of idling
POWER ADAPTER – USA 110-240v
INSTRUCTION MANUAL – Included in a box ready for gifting

BONUSES GALORE!
4 Random FILAMENTS -over 9 feet each in random colors
SHAPING SPATULA
SILICONE DISPLAY MAT
DOCKING STATION
USA FLAG KEY CHAIN

NOTE: SAFETY WARNINGS
Suitable for children over 8 years old with adult supervision.
Nib & nib area are extremely hot so do NOT TOUCH with hand or other items.
Unload the filament after use & turn off the power.
Store in a safe place, away from children.

Easily design & draw in 3D By 2Dream 3D PRINTING PEN SET.

30-DAY GUARANTEE – RISK-FREE!

Click The Add To Cart and ORDER NOW your very own 3D pen TODAY! Before we SELL OUT

 

Product Features

  • ★ COMPREHENSIVE 3D PRINTING SET: This second-generation all-in-one 2Dream 3D PRINTING PEN SET is designed for sketching, printing, or doodling in 3-dimensions; each kit includes a yellow pen, 4 random colored filaments, spatula, silicone mat, docking station, keychain, power adapter, 3d pen in a gift box ready for giving to children 8 years or older and adults who like to draw dimensionally and be creative;
  • ★ EASY TO USE WITH MANY OPTIONS: Plug in your 2Dream 3D PRINTING PEN, feed the filament color you desire, and start writing, painting, or drawing art, crafts, and science or school projects; the LCD screen displays temperatures adjustable from 160 to 230 degrees for filament ; change speed by a single finger; it shuts off after 5 minutes of idling and comes with a 0.7mm diameter nozzle;
  • ★ SAFETY FIRST: FCC, CE, and RoHS certified, the 2Dream 3D PRINTING PEN SET has filament that is environmentally-friendly material made from renewable plant resources, so it does not create a pungent odor when uploading, and it is safer for kids and adults; this 3D pen is suitable for children over 8 years old with adult supervision; WARNING: Do NOT touch nib area while using as it is extremely hot and unload filament after use with the power off;
  • ★ ADDED BONUSES: Every 2Dream 3D PRINTING PET SET includes the writing pen with a spatula for shaping the heated filament, a silicone placemat for designing, a docking station when not writing, 4 random colored 1.75mm filament rolls (a total of over 36 feet), USA flag keychain Independence day, 110-240v power adapter, all come in a gift box with detailed instructions for the artist in your life;
  • ★ 30 DAY GUARANTEE: We strive to provide you with the highest quality product and the best customer experience possible; our 3-dimensional pen has a 30-day money-back guarantee; if you’re not satisfied, please let us know immediately; get your 2Dream 3D PRINTING PEN SET that comes with a pen, 4 random filaments, spatula, display mat, docking station, power adapter, keychain ; get creative 3-dimensionally on your next project.

Click Here If You Need More Detailed Info…