WINSINN 3D Printer Controller Kit for Arduino Mega 2560 Uno R3 Starter Kits + RAMPS 1.6 Upgraded Mosfet + 5Pcs DRV8825 Stepper Motor Driver + LCD 12864 for Arduino Reprap


Ramps 1.6 board:

-Ramps 1.6 is optimized and launched based on Ramps 1.4 & Ramps 1.5. The Struture almost same as Ramps 1.5 , the difference is Ramps 1.6 have new 2pin connectors,which more simple and convenient to connect,also will not be burnt easily. And Ramps 1.6 have a good Heatsink above MOS tube in order to give a better function to heat dissipation. Beside, the Power of Ramps 1.6 is more larger than Ramps 1.5, the largest power will be up to or 270W, and Ramps 1.5 just can be up to 200W, or smaller than 200W.

DRV8825 Driver:

-Suitable for driving below 8.2V ~ 45V 2.5A stepper motor
-Six different stepping resolutions: full, half, 1/4,1/8,1/16,1/32
-Adjustable potentiometer can adjust the maximum output current, resulting in higher step rate
-Automatic current decay mode detection / selection
-Thermal shutdown circuit, undervoltage lockout, crossover current protection
-Ground short-circuit protection and load short-circuit protection

Mega 2560 R3:

-Operating Voltage: 5V
-Input Voltage (recommended):7-12V
-Input Voltage (limits):6-20V
-Digital I/O Pins:54 (of which 14 provide PWM output)
-Analog Input Pins:16
-DC Current per I/O Pin:40 mA
-DC Current for 3.3V Pin:50 mA
-Flash Memory:256 KB of which 4 KB used by bootloader
-SRAM:8 KB
-EEPROM:4 KB

—————————————————————————————————————

Package include:
►1 x RAMPS 1.6 Board
►1 x Mega 2560 R3 Board
►1 x 12864 LCD Display Controller
►1 x LCD Smart Adapter
►5 x DRV8825 Stepper

———————————————————————————————————————

►Note:
►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:))

Product Features

  • ✔️DRV8825 driver board widely used in 3D printers and small CNC machines. It is upgrade of A4988, 4-layer PCB for improved heat dissipation and decrease chip resistance. It suitable for driving below 8.2V ~ 45V 2.5A stepper motor, And had Six different stepping resolutions: full, half, 1/4 ,1/8, 1/16, 1/32.
  • ✔️12864 LCD: The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.6 board using “smart adapter” included. This panel connect your RAMPS 1.6, you do not need your computer, your SD card intelligent controller power supply. All further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller.
  • ✔️This kit includes a complete set of the most common and useful components that can be used by all tech-savvy people out there to build their own printer controller. A number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
  • ✔️Product Warranty: WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty. If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
  • ✔️Ramps 1.6 is optimized and launched based on Ramps 1.4 & Ramps 1.5. The Struture almost same as Ramps 1.5 , the difference is Ramps 1.6 have new 2pin connectors,which more simple and convenient to connect,also will not be burnt easily. And Ramps 1.6 have a good Heatsink above MOS tube in order to give a better function to heat dissipation. Beside, the Power of Ramps 1.6 is more larger than Ramps 1.5, the largest power will be up to or 270W, and Ramps 1.5 just can be samller than 200W.

Click Here If You Need More Detailed Info…

3D Printer – 5pcs GT2 Idler Timing Pulley 16/20 Tooth Wheel Bore 3/5mm Aluminium Gear Teeth Width 6/10mm 3D Printers Parts for Reprap Part – (Size: 20T W6 B5 Without T)

Welcome to our store, Have a nice day!
Package list:
5 xwheel pulley
Pay attention:
We have 8 types of pulleys:
1. 16tooth width 6mm bore 3mm
2. 16tooth width 6mm bore 3mm without teeth
3. 20tooth width 6mm bore 3mm
4. 20tooth width 6mm bore 3mm without teeth
5. 20tooth width 6mm bore 5mm
6. 20tooth width 6mm bore 5mm without teeth
7. 20tooth width 10mm bore 5mm
8. 20tooth width 10mm bore 5mm without teeth
please make sure what is type of your choice, check it again when you pay it,
(T: teeth W: width B: bore)
Product parameters:
Tooth Type:GT2
Width:6mm/10mm
Material: Alloy
Teeth number :16T/20T
Bore: 3mm / 5 mm
Net weight:around 5g
Picture Shows:
Item specifics:
Item type: Pulley
Model number: GT2-6
Type: Timing
Number of teeth: 20mm/16mm
Material: Stainless Steel
Width: 6mm/10mm

Product Features

  • Size: 20T W6 B5 Without T
  • Item type: Pulley
  • Model number: GT2-6
  • Type: Timing
  • Number of teeth: 20mm/16mm

Visit The Website For More Information…

3D Printer I3 High Precision Large Size Desktop 3D Printer Kit Reprap Prusa I3 DIY Self-Assembly LCD Screen PLA/ABS Filament 1.75MM DIY 3D Printer 200x200x180 (i3 3D Printer)

self-assembly I3 3D Printer Kit

 Technical parameters:

  • Maximum print size: 200mm * 200mm * 180mm, it is recommended to print a smaller size
  • Operating System: Windows 7/8 (32-bit / 64-bit) Software: Healing
  • Data import format: STL, G-code
  • The maximum temperature of the printhead: 260 ° C (normally 210 ° C)
  • Maximum soil temperature: 130 ° C (typically 65 ° C)
  • Operating temperature: 10-30 ° C, humidity: 20-50%
  • Hot bed materials: bakelite, aluminum, PCB, glass
  • Input voltage: AC 110V-220V
  • Packing size: 470 * 470 * 330mm
  • Dimension of the device: 430 * 505 * 380mm
  • Package weight: 11 kg
  • Weight of the equipment: 8 kg

Technical parameters:

  • Carrier made of printed material: ABS, PLA (LAYER DISTRIBUTION: 0.1-0.4 mm)
  • Pressure diameter: 1.75 mm
  • Printing speed: 120 mm / s
  • Positioning accuracy of the XY axis: 0.011 mm
  • Positioning accuracy on the Z axis: 0.004 mm
  • Temperature of the hot bed: 70 ° C
  • Power supply: 12V
  • SD card: support from
  • LED screen: yes

3D printer packaging:

  • All modules
  • All assembly tools
  • Software
  • Coil 1.75MM (ABS / PLA random)
  • CD (lessons per CD)

 DIY installed video link:
https://www.youtube.com/watch?v=PSzcU48wczk&feature=youtu.be

Product Features

  • 【Advanced Technology】Customized MK8 nozzles, rugged and compact lead screws, advanced high-speed motors, advanced motherboards, superior power system, 3D filaments for ABS, PLA, HIP, PP, nylon and many other models.
  • 【High Compatibility】Operating system and working environment: Windows XP / Windows 7 / Windows 8 / Mac / Linux / Windows 10. Temperature: 10 – 30 degrees Celsius, humidity: 20 – 50 degrees Celsius
  • 【Print Area】Printed area of 200 x 200 x 180 mm, insulated with synthetic wood frame. Maintain a perfect construction feel and hand-made charm.
  • 【Unassembled DIY kit】It’s an unassembled DIY kit that provides you with an unforgettable 3D printer step-by-step learning experience from the ground up. As long as you are passionate about creativity, this product is your choice!
  • 【Professional after sales】Wide range of applications. 3D printers have been able to print a lot of things, which have a great impact on the medical, cultural, architectural, food, automotive and other industries. His wide application may exceed our imagination. Buy BUBU Bird’s 3D printer for lifetime technical support and after-sales service and a one month replacement policy for accessories issues.

Click Here If You Need More Detailed Info…

608ZZ 8 x 22 x 7 mm Deep Groove Ball Bearing, 20 Pcs Double Metal Shielded, Fit for Skateboard Bearings, 3D Printer RepRap Wheel, Longboard, Roller Skates, Inline Skates, Scooters etc. (Pack of 20)

Visit The Website For More Information…