Our thermistor can replace stock thermistor in Duplicator i3 / Maker Select V1, V2, V2.1 and Plus 3D Printers. Thermistor assembled with 600C rated ceramic glue and fiberglass insulation wires. Wiring insulation can withstand much higher heat than stock PTFE insulated thermistor, it will result in longer service life and you also can print more different materials on your printer without damaging thermistor.
NTC 3950 HEX thermistor features:
M3x0.5 threaded stud to use in place of M2 clamping screw on MK10 extruder heater block.
Wiring insulation: fiberglass.
Wiring length: 130mm.
Connector type: JST XHP.
NTC 100K thermistor 3950K beta A value.
Use TEMP SENSOR number 11 in Marlin.
High accuracy: 1%.
Resistance value at 25°C=100K
1 x HEX stud NTC 3950 100k Thermistor for Wanhao / Maker Select.
- Drop-in replacement for stock thermistor on MP Maker Select Plus / Wanhao Duplicator Plus
- Also compatible with MP Maker Select V2.1 and Wanhao Duplicator V2.1
- Easy to mount with M3 HEX stuв
- Can hold temperature up to 300C with ceramic glue and fiberglass insulation on leads
- Designed and manufactured by USA Company
Visit The Website For More Information…
Twelve 500G spools of premium PLA filament in a bundle package. Only popular filament colors for a great price! top quality.
- True pantone colors (white, yellow, orange, red, bright blue, bright green, pink, purple, blue, green, gray, black)
- 12x 0.5 kg (approximately 1.10 lbs) spools
- 1.75 mm filament diameter (Dimensional accuracy +/- 0.02mm)
- Recommended extrusion/nozzle temperature 190°C – 230°C (374°F – 446°F)
- PLA (Polylactic acid) 3D Printer Filament vacuum-sealed with desiccant, resealable bag
Check Out Our Website For Details…
This kits is a result of our effort to improve existing and popular Z-brace kits based on 3D printed parts. Our kit is fully metal kit, no printed parts. It looks minimal compared to the 3D printed Z-brace designs, but it will make your frame completely stable, just like other similar kits.
In our kit we use ball joints to eliminate any tension created by misalignment between upper and lower bracket. Off shelf M5 ball rod ends are making our Z-brace design simple and clean looking.
Convenient feature of our kit is ability to allow fine adjustment of the each Z-rod length. Z-Brace rod design is based on turnbuckle principle – each rod will extend and contract by turning tube clockwise or counterclockwise. When you are done with adjustment – just tighten counter nuts on each rod end to get rid of any small play and you will make your adjustment permanent. After you tighten counter nuts your frame will become completely solid and stable.
- Compatible with Wanhao Duplicator i3 and Maker Select V1, V2 and V2.1 3D Printers
- For Maker Select PLUS 3D Printer please use other kit sold in our store
- CNC machined all metal design. Black anodized parts will look great on your 3D Printer
- Designed and manufactured by USA company
Click Here If You Need More Detailed Info…
Bowden line teflon tubing is for 1.75mm filament. 4mm OD 2mm ID. Please, check out our store for PC4-M6 push-in fitting.
1 x 2 Meter PTFE/teflon tube.
Detailed Information available on our Homepage…