We Believe You Should Love Your Filament Not Just Tolerate It!
Our Evaluation Process – We researched and tested filament before partnering with the right manufacturer so you receive filament that is consistent, high quality and backed by excellent customer service.
What We Test – we look at 3 areas when evaluating filament
1. Ovality and Diameter – We use a dual head laser micrometer to simultaneously test the X and Y axis of the filament to determine the roundness and diameter consistancy with high accuracy. The laster micrometer we use has the following stats: Resolution of 0.0002mm, repeatability of +/- 0.0008mm, and Linearity (@100 Scans per second) of +/- 0.0013mm 2. Color Opacity – Next, we compare the filament to the color it was intended to reproduce by using the Pantone Color Matching System (PMS), and how consistently it stays true to that color. 3. Chemistry and Print Quality – We also test the filament’s capacity to produce a high quality print by us printing with it and seeing the results ourselves firsthand
Our 90-day 100% Satisfaction Guarantee To You – If for any reason, or no reason at all, you are not completely satisfied we insist you send it back via our 90-day Pro-rated Money Back Guarantee. What ever portion you haven’t used can be sent back for a pro-rated refund.
Our Excellent Customer Service – We don’t hide from our customers. If you have any questions or problems you can email or call us directly via our 800 number and we will respond within 1 business day. Our office hours are M-F 8am to 5pm ET.
- 1.75mm PLA made with strict controls to match Pantone color number system for vivid, consistent colors
- Tight tolerance controlled standards for diameter (+/- 0.0079mm = 1 Std. Deviation) and roundness (+/- 0.0141mm = 1 Std. Deviation)
- 1kg (2.2 pounds) if filament on Spool, sealed in bag with desiccate
- Spool Dimensions: 7.875″ Diameter x 2.75″ wide x 3.75 Inner Diameter with a 2.0″ spool hub diameter
- Recommended Extrusion/Nozzle Temperature 190°C – 230°C (374°F – 446°F) and does not require a heated print bed
Check Out Our Website For Details…
1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts;
2. Please do not use flame to test their heat resistance, because the flame’s temperature is much higher than 300 degrees Celsius (572 Fahrenheit ).
Heat insulation cotton: Length 80mm/3.15in, width 20mm/0.78in, thickness 2mm;
PTFE high temp tape: Total length 10m/32.8ft, width 8mm, thickness 0.13mm
10PCS heat insulation cotton;
One Roll of PTFE High Temp Tape
- Compatibility: Matches all 3D print extruder heater block offered from E3D Makerbot, MK8 Makerbot RepRap , etc.
- High temperature resistance: Both PTFE tape and heat insulation cotton, short term resistance to temperature 260 degrees Celsius (500 Fahrenheit ), long term resistance to temperature 300 degrees Celsius (572 Fahrenheit )
- Function: Keep heater block temperature constant, so that improving the quality of the printed matter, save electricity and prolong the service life of heater and temp sensor
- Use-method: You can cut cotton into the right size and hole according to your needs, then stick it firmly with PTFE tape. 5 sides of heater can be wrapped up in cotton, except the surface installed heater wire, but you just need to use 1 piece cotton. You can also use PTFE tape to stick any other parts on your 3D printer
- Material: The heating insulation cotton is made from heat resistant ceramic fiber, the tape is made from PTFE
Visit The Website For More Information…
Color: Silver, White, Black, Red, Orange, Green, Pink, Gray
Size:200x20cm / 78.7″x 7.9″
-Self adhesive stickers
-Long lasting, flexble and durable.
-High temperature & water Proof
-Easily cleansed with water.
-Fashion and decoration, unique and attractive.
-Resistant to UV, water, dirt, grease, salt, mild acid and oil.
-Carbon fiber vinyl can be re-lifted, repositioned and stretched with heat gun.
-Can be applied on the interior and exterior surface of car or motocycle as u like to protect the car.
Need sharp utility or xacto style knife,squeegee, blow dryer, or heat gun to install. You can cut the shape you like.
Common use,fit for car used, motorcycle parts,such as roofs, hoods, trunk lids, wing covers, bumper.
You also use on mobile phone, laptop, furniture window molding etc.
Please note tools are not included.
1 x 200x20cm Carbon Fiber Vinyl Sticker
- 80 % ORDERS ARRIVE IN 7-12 BINESS DAYS
- Vynil wrap carbon fiber vinyl texture vietnam hard sheets wallet hood wallpaper roll sticker interior brh tape
- Carbon fiber vinyl wrap hood interior laptop wood gloss 1080 dinoc vynal fibre vynil water filter window tint vvivid blue headlight grey marble black roll matte white chameleon wraps cars tool wrapping boat film chrome adhesive
- Vinyl wrap tools roll tool cars knife squeegee white gloves black carbon fiber matte flat motorcycle film blue pink filament sheet sticker decal sheets chameleon body printer roof screen protector racer rear wings brh fabric gloss colored cleaner cutter cutting color rojo vintage purse dress ring overalls leather belt circles levis pantry sign
Detailed Information available on our Homepage…
Shape: Hammer Head
Material: Carbon Steel
Thread Type: M3
Total Size: 10 x 6 x 4mm/0.39″x0.24″x0.16″(LxWxT)
1.Made of high-quality carbon steel.
2.T-Nut with M3 thread.
3.Suitable for standard aluminum profile extrusion slot.
50 x M3 Thread T-Nuts
- 2020 Series Aluminum Profile T-Nuts widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects
- Made from high quality carbon steel, these nuts have high hardness and a long service life surface is Nickel-plated for good rust resistance and better performance.
- There are total 50pcs nut that you can use for many projects.
- Half Round Roll In Sliding T Slot Nut 6mm Slot They are simple to use and convenient to connect aluminum profiles to other parts.
- These hammer head nut are mainly used for 6mm slot standard aluminum extrusion profiles.
Visit The Website For More Information…