200x200mm 12V Silicone Rubber Heater for 3D Printer Heated Beds

You are looking at the ultimate heating element for your 3D printer’s bed. This is a premium silicone rubber heater, normally used in industrial environments to heat large tanks of liquid. We had these custom made to be the fastest, most evenly heated elements available. They include a built in 100k thermistor for accurate readings with easy setup. They run off 12v power so no dangerous voltage and they CAN be run directly with some electronics (some electronics may require a relay due to the current draw). We have tested these with a Azteeg X1 and X3 from http://www.panucatt.com as well as the RAMPS 1.4 directly with no problems (YMMV). These heaters are flexible and WILL REQUIRE a flat build surface such as glass to mount to.

  • 200mm x 200mm / 8″x8″
  • Durable Silicone Rubber Construction
  • Extremely Even Distribution of Heat
  • Industrial Duty Cycles For Long Life
  • Heats To 120 Degrees C in About ONE Minute (assuming adequate power supply)
  • Integrated 100k Thermistor For Accurate and Reliable Temperature Readings
  • Integrated Thermistor Beta Value 3950K
  • Thermistor Leads Are Insulated and Ready To Go
  • Draws Up to 15 Amps @ 12v So Make Sure Your Power Supply Can Handle It…a 350W+ or Dedicated 12v Power Supply is Recommended

Product Features

  • Most Even Heating Even to the Edges of All Heater Types
  • Includes Integrated 100K Thermistor (Epcos #1 Table)
  • FLEXIBLE and Requires Build Surface (Basalt, Aluminum, Glass etc.)
  • Adhere with Silicone to Build Surface

Detailed Information available on our Homepage…

300x300mm 12V Silicone Rubber Heater for 3D Printer Heated Beds

This is the ultimate heating element for your 3D printer’s bed. This is a premium silicone rubber heater, normally used in industrial environments to heat large tanks of liquid. We had these custom made to be the fastest, most evenly heated elements available. They include a built in 100k thermistor for accurate readings with easy setup. They run off 12v power so no dangerous voltage and they CAN be run directly with some electronics (some electronics may require a relay due to the current draw). We have tested these with a Azteeg X1 and X3 from http://www.panucatt.com as well as the RAMPS 1.4 directly with no problems (YMMV). These heaters are flexible and WILL REQUIRE a flat build surface such as glass to mount to.

  • 300mm x 300mm / 12″x12″
  • Durable Silicone Rubber Construction
  • Extremely Even Distribution of Heat
  • Industrial Duty Cycles For Long Life
  • Heats To 120 Degrees C in About ONE Minute (assuming adequate power supply)
  • Integrated 100k Thermistor For Accurate and Reliable Temperature Readings
  • Integrated Thermistor Beta Value 3950K
  • Thermistor Leads Are Insulated and Ready
  • Draws Up to 20 Amps So Make Sure Your Power Supply Can Handle It…a 400W+ or Dedicated 12v Power Supply Is Recommended

Product Features

  • Most Even Heating Even to the Edges of All Heater Types
  • Includes Integrated 100K Thermistor (Epcos #1 Table)
  • FLEXIBLE and Requires Build Surface (Basalt, Aluminum, Glass etc.)
  • Adhere with Silicone to Build Surface

Detailed Information available on our Homepage…

ETOU Floral Print TPU Rubber Case for iPhone 5

Features
Designed to precisely fit the contours of the iPhone 5
Slim, lightweight design, easy to slip in and out of pockets with ease.
Full protection to prevent dust, dirt, shock and abrasion.
Easily use the ports, camera and buttons without removing case.
Personalizes your cell phone


Product note:
Attention “Apple” “iPhone” “iPod” and “iPad” are trademarks of Apple Inc., This is not claimed to be an authorized or branded product by Apple Inc. This product and our company are not affiliated with Apple Inc. or endorsed by them in any way.
Please be aware this product has no Logo printed on it. The case is transparent and the logo you can see is actually on your device!!!

Product Features

  • Designed to precisely fit the contours of the iPhone 5
  • Slim, lightweight design, easy to slip in and out of pockets with ease.
  • Full protection to prevent dust, dirt, shock and abrasion.
  • Easily use the ports, camera and buttons without removing case.
  • Personalizes your cell phone

Click Here For More Information on 3D Printing

Bayke® iPhone 5C Green 3in1 Hybrid Aztec Tribal Patte Print Dirtproof Defender Case + Black Rubber Silicone

Specification:

– Compatible with: iPhone 5C, At&T, Verizon, and Sprint.

– Brand: Bayke

– Quantity: 1

Package Includes:

-1 x iPhone 5C Aztec Tribal Patte Hybrid Defender Case

Please Note:

-This case is designed for iPhone 5C only.

-Accessory only, phone is not included.

This product sale from professional sellers for EBAYKE, if you buy this product from elsewhere, we can not ensure the quality of the products, also can not provide return or exchange service. we are sorry for the inconvenience brought to you.

Original cellphone cases come with eBayke LOGO retail packages,or it will be FAKE! If you received a item is NOT original,you can request a full refund and take your MONEY BACK!!

About Us:

Bayke® is US brand producing a full line of 3C parts and accessories. We are dedicated to creating products that provide our Amazon customers satisfaction beyond expectations. Whatever profession, passion, or interests they pursue: Our customers deserve the best quality “carrying solution” that provides maximum protection. Our products will enhance your experience to unparalleled inspiration. And The Bundle accessories will provide more convenient for shopping and save your time and money.

We quite appreciate your valuable time on your purchase. Meanwhile we fully understand we can’t offer the 100% satisfaction to all Amazon customers, but we’d sincerely like to figure out the exact issues from all our customers. We work as an honest seller, so we believe we can rapidly expand our online business with all your royal supports.

Product Features

  • Design for Apple iPhone 5C (AT&T, Verizon, T-Mobile, US Cellular & Sprint)
  • High quality PC material and soft TPU Silicone
  • Perfect cutouts and slim design allow you to maximize the functionality of your phone.
  • Unique design allows easy access to all buttons.
  • New Custom Aztec Tribal Patte Print case & compact design

Click Here For More Information on 3D Printing