Range: -10°C – 500°C
Inner diameter: 0.4cm/0.2″
Outer diameter: 0.65cm/0.3″
Interface: Red is T+, Blue is T-.
5 xK-type Temperature Sensor Thermocouple
1ãPlease allow 1-3cm error due to manual measurement.Pls make sure you do not mind before you bid.
2ãThe color may have different as the difference display, pls understand.
Item type: Pneumatic Connectors
Model number: no
- Package Includes: 5 xK-type Temperature Sensor Thermocouple
- Item type: Pneumatic Connectors
- Model number: no
Click Here For More Information
Pxmalion Mini 3D printer is an entry-level 3D printer from Pxmalion. It has a relatively small footprint, with a smaller than average print area – however, the emphasis here is on ease of assembly and use.
Comes with pre-assembled X/Y/Z axis. It takes only very few time to complete the assembly. Features with Cantilever Design, Auto Bed Level and Filament Run Out Detection.
Please kindly download the INSTRUCTIONS via the link below.
Printing technology: FDM (hot melt lamination technology)
Print size: Max. 120 L x 120 W x 150 H mm
Printing Accuracy: X, Y, Z 0.1 mm
Position accuracy: 0.01 mm
Lamination pitch: 0.05 – 0.2 mm
Nozzle diameter: 0.4 mm
Nozzle temperature: 0-245°C
Printing speed: 0 – 60 mm/s
Filament diameter: 1.75 mm
Printing material: PLA
XY Movement operation: Step motor & timing belt
Z Move operation: Step motor & lead screw
Casing: Aluminum material & acrylic board
Platform: Stainless steel sheet
File format: G – CODE (Please convert STL and OBJ to G – CODE)
Operating system: Windows / Mac OS X
Connection: Micro SD card (Micro SD card is not included)
Voltage: AC 100 – 240 V 50 Hz – 60 Hz
Product size: 290 L x 197 W x 290 H mm
Packing size: 356 L x 187 W x 320 H mm
Product weight: 3.8 kg
Packing weight: 4.8 kg
1 x Pxmalion MINI 3D printer
1 x Auto Leveling Sensor
1 x Power Adapter
1 x Tool Kit
1 x USB Cable
1 x Tape for platform
1 x PLA Filament 40g
With use of an adhesion sheet, the 3D print adhesion to the build plate will be highly improved as well as the printing results. You can seach ASIN B07DYPWTWD to find Pxmalion customized print sheet for Pxmalion MINI
- Pxmalion Mini 3D printer is an entry-level 3D printer from Pxmalion. It has a relatively small footprint, with a smaller than average print area – however, the emphasis here is on ease of assembly and use.
- With use of the standard FDM process, the Pxmalion Mini is a Cantilever printer, for those who want to begin their 3D printing experience with low budget and without having to spend lots of time to build a DIY kit.
- This is an ideal lightweight desktop 3D printer for a quick start into 3D printing. Especially for the kids and students, it delivers so many opportunities to learn and explore the world in many respects and helps promoting their ability to interact with physical models, rather than theoretical ones.
- Simply reload a new spool and press the button, then the printing will continue from the place where it was stopped. You can also change to a new color of spool after the previous filament runs out. Create multi-colorful shaped objects becomes much easier. The function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
- Basic Feature: The main body size is 290 L x 197 W x 290 H mm. The max print size is 120 L x 120 W x 150 H mm. It’s recommended to print at 0-60mm/s.
Click Here For More Information
12V soil moisture sensor controller module Lower humidity start automatic watering
Humidity is below the set humidity start means that when soil moisture is below the set humidity , the relay will automatically pull, start spraying , water pumps , etc. do humidifying action reaches the set humidity is automatically stopped.
Adjustable via potentiometer control soil moisture threshold , which can automatically vegetable garden , garden automatic watering , household pots of soil moisture control , electronic game , etc., with a power relay , can control high current devices , less than the set humidity automatically start relay , more than the set humidity automatically disconnected , and a delay function to resolve without delay the humidity critical state relay flickered question is a simple and practical soil moisture control system.
1 using the company\’s high-quality soil to make the soil moisture sensor detection surface is nickel plated, has widened sensing area can improve conductivity, prevent rust easily contact with soil problems and prolong life .
(2) products can be controlled over a wide range of soil moisture , adjustable via potentiometer control the corresponding threshold , the humidity is below the set value, the relay starts , higher than the set value, the relay is switched off .
3 product with a delay function , delay 3-5 seconds , when the humidity in the critical condition is detected , the relay does not flicker , flicker occurs .
4 high-quality products using Songle relay can withstand the load of 1500W , meet the requirements of most people .
5 products with a power indicator and relay instructions .
Supply voltage : 12VDC Input current : more than 100ma
Load : 250V 10A AC or DC 30V 10A (below a current of this range can be used)
Module for use:
1 soil moisture sensor for detection .
- 1 using the company\’s high-quality soil to make the soil moisture sensor detection surface is nickel plated, has widened sensing area can improve conductivity, prevent rust easily contact with soil problems and prolong life .
- (2) products can be controlled over a wide range of soil moisture , adjustable via potentiometer control the corresponding threshold , the humidity is below the set value, the relay starts , higher than the set value, the relay is switched off .
- 3 product with a delay function , delay 3-5 seconds , when the humidity in the critical condition is detected , the relay does not flicker , flicker occurs .
- 4 high-quality products using Songle relay can withstand the load of 1500W , meet the requirements of most people .
- 5 products with a power indicator and relay instructions .
Click Here For More Information
1. Upgraded A8 DIY i3 3D printer with a new feature of auto self-leveling function, easy for operation.
3. Customized MK8 nozzle with sophisticated technology to produce smooth filaments fluently.
4. T-shape lead screw, high quality stainless steel, more durable and sturdy for use.
5. Advanced and high-speed motor, continue to prolonged work hours for greatly improved the working efficiency. Updated sophisticated V2.0 version mainboard, supporting multi-function, higher accuracy.
Frame Material: Acrylic
Hotbed Material: Aluminum Alloy
Nozzle Quantity: 1
Printing color: Single
Printable Material: ABS/PLA/HIPS/TPU/Wood/Nylon/PP etc
Filament Diameter: 1.75mm
Max. Printer Size: 220 * 220 * 240mm
Printer Speed: 10-120mm/s
Nozzle Diameter: 0.4mm
Layer Thickness: 0.1-0.3mm
Printing Accuracy: 0.12mm
XY Axis Accuracy: 0.015mm
Z Axis Accuracy: 0.005mm
Nozzle Temperature: Max. 260°C
Hot Bed Temperature: 50-100°C
Recommend ABS Setting: Nozzle: 230 °C Hotbed: 80 °C
Recommend PLA Setting: Nozzle: 210 °C Hotbed: 50 °C
Operating System: Windows XP/Win7/Win8/Mac/Linux
Printing Software: Cura / Repetier-host
File Type: .STL / .OBJ / G-code
1 * Set DIY 3D Printer Kit
1 * SD Card(Installation Instruction Included)
1 * Card Reader
4 * Hex Wrench
1 * Open Spanner
1 * Nipper
1 * Screwdriver
1 * 10m Filament
1 * auto level sensor
(Ship from United State Warehouse.)
- Affordable and competent 3D printer kit, with 10m ABS/PLA filament and auto leveling sensor for ease of use;
- 2004 LCD screen, English interface, 5 keys for easy operation, support SD card and off-line printing;
- Supports TF card off-line printing, especially convenient when without the computer;
- Heated hotbed and MK8 extruder nozzle with wide range temperature adjustments allow the printer to compatible with many 3D filament types, such as ABS, PLA, HIPS, PP and Nylon etc.;
- More stable Aluminum alloy frame, more accurate printing accuracy;
Click Here If You Need More Detailed Info…