CCTREE 3D Printer Build Surface with 3M Sticker 3D Printer Heated Bed Sheet For XYZ,Finder,Creality Ender 2 6X6″ (Pack of 3)

Size:155mm x 155mm (6″x6″)
Color:Blue
Background is made of 3M adhesive , easily stick on the heat bed platform

HOW TO USE:

There are 2 methods to attaching the build surface on heatbed:

1. clamp the build surface to the print bed using binder clips(at least 3 clips)

2. Torn off 3M tape on back and stick it on heatbed.

Product Features

  • Size:155mm x 155mm (6″x6″)
  • Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward
  • Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPU) filaments
  • Single sheet design installs more quickly and with fewer bubbles than tape or films
  • Durable construction allows for multiple uses with either the same or different filament material

Visit The Website For More Information…

Gizmo Dorks PEI Sheet 8″ x 8″ 1 mm 3D Printer Build Surface Ultem 1000

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion.

How to Use:

Cut the PEI sheet to size by scoring with a hobby knife. There are two methods to attaching the PEI to your print bed. The first method is to just clamp the sheet to the print bed using binder clips. We find that 2 on each side works great.The second method, get 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.

Once the PEI sheet is attached, re-level your print bed and you are ready to go!

It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 5000 grit paper will also give the PEI sheet more life.

Product Features

  • MADE IN THE USA: Single 1mm thick sheet installs quickly on top of existing flat build platforms (e.g. borosilicate glass)
  • ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
  • REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
  • Sheet can be easily cut down to desired size by scoring with a utility knife

Detailed Information available on our Homepage…

[Pack of 4] Pxmalion 3D Printing Build Surface, 3D Printer Platform Sheet, 8.6″ x 8.6″ Square, ABS/PLA/TPU/Wood Compatible (Black)

This is a set of 4 pieces Pxmalion 8.6″x8.6″ 3D printing build surface sheet that adheres to a print bed of a fused-filament 3D printer help the filament stick during printing. You can peal off the printed part from platform easily and cleanly. The sheet is compatible with ABS, PLA, Flexible (TPU) and wood.

Friendly Tips

1) Please confirm size before purchase. If the sheet is larger, you can cut the sheet to meet your need.
2) After the build surface stuck to the build plate, it’s advised to level it again, since the thickness of build sheet is 0.5mm.

Package

4 x Pxmalion Build Surface Sheet

Product Features

  • Pxmalion 3D printing build surface instantly creats a stable base for the perfect print, helps increase the success rate of 3d printing and precision of modeling, no raft needed.
  • During printing, you can firmly fix the resin and print without warping. After printing, you can easily peel off the model. It is possible to print multiple times even in the same place.
  • 1 Set: 4 pack included. Size: 220mm (8.6″) x 220mm (8.6″) x 0.5mm.
  • Compatible with multiple filament materials: ABS / PLA / TPU / Wood.
  • Friendly Tips: 1) Please confirm size before purchase. If the sheet is larger, you can cut the sheet to meet your need. 2) After the build surface stuck to the build plate, it’s advised to level it again, since the thickness of build sheet is 0.5mm.

Visit The Website For More Information…

3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12”x12″ Square (PACK of 4)

DOBSTFY Brand 3D Printer platform can be suitable for temperature from 80-100 degrees. Build sheet adheres to a print bed to help the filament stick during printing, it is easy to take off the models. Compatible with most Cartesian style 3D printers and most of surface. The build surface size is 12″ x 12″, you can cut it to any size you want.

Package includes:

4 * 3D Printing Build Surface Sheet

Product Features

  • •[SPECIALLY DESIGN PATTERNS] DOBSTFY Heat Bed Platform Sticker made of high quality matte surface material, it can make you easy clean removal the printed part afterward, and print directly on to the surface without any additional adhesives, tapes, or slurry. With the specially designed patterns of scaling and positioning, mark can make your DIY processing more fun and easy.
  • •[EASILY TO USE] Background is made of 3M adhesive, easily stick on the heat bed platform, and instant bonding with convenient use. It installs more quickly and with fewer bubbles than tape or films.
  • •[FULLY COMPATIBLY] Our 3D Printer heatbed platform sheet durable construction allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments.
  • •[REUSE & CUTTABLE] The 3D-printing build surface is an 12″ x 12″ square sheet, reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results. This sheets can be asily cut down to desired size by scoring with a utility knife.
  • •[LIFETIME WARRANTY] We stand behind every product you purchased from us. If you have any problem with your purchase, please contact us directly to get efficient and hassle-free customer service.

Detailed Information available on our Homepage…