LABOTA 5 Pieces 0.3 mm Drill Bits for 3D Printer Nozzle Cleaning Kit Stainless Steel Nozzle Cleaning Tool Kit (Silver)

Features:
It is made of stainless steel with good flexibility, not rust or break easily.
The drill bits will clean your printer nozzles very well and make it print better.
Compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap, etc.

Enough quantity:
5 Pieces of nozzle drills applicable in your daily life, and they are stored in a box, in case of missing.

Specifications:
Material: stainless steel
Bit diameter: 0.3 mm
The bit length: 5 cm
Total length:, 8 cm
Box length: approx 10 cm; box diameter: approx 12mm

Package included:
5 x Needle drill bits
1 x Plastict box

Notes:
the drill is small and sharp, please keep it in the box after use and keep it away from children to avoid injuries and losses.

Product Features

  • Material: Stainless Steel; not easy to rust or break
  • Compatibility: Compatible with most well known 3D Printers on the market (e.g. Duplicator, MakerBot, RepRap etc.).
  • Quantity: 5pcs
  • Bit Diameter: 0.3mm; The length of drill: 5cm; The total length: 8cm
  • Function: it can be applied to accurately measure the diameter of nozzle holes, you can use it to clean the small size nozzles and other small parts by this tool kit, such as the feed gear

Click Here If You Need More Detailed Info…

PChero 5pcs 3D 0.4mm Extruder Brass Nozzle Printer Head + 5pcs 1.75mm Stainless Steel Nozzles Throat with PTFE Tube, for V6 Makerbot Printer

Specification:

Package Weight: 36 gram
Package Dimension: 13.2x13x1.5 cm

Brass Extruder Nozzle Spec.:

Color: Golden
Input Diameter: 1.75mm
Output Diameter: 0.4mm
Length: 12.42mm
Weight(1 pc): 3 gram.

Nozzles Throat Spec.:

Material: Stainless Steel
Filament Diameter : 1.75mm
Length:22.50mm
Weight(1pc): 3 gram.

Caution: Small parts, please keep away from children!!!

Package Included:

5 x M6 3D Printer 0.4mm Extruder Brass Nozzle Print Head.
5x .75mm Stainless Steel Nozzle Throat with PTFE Tube

Related Products(copy and paste code into Amazon search):

Metal J-Head V6 Hotend w/ Cooling Fan & PTFE tube: B073531GFJ
Heat Bed Power Module/Mos Tube: B072MF3ZDD
5pcs Mechanical Switch Endstops w/ Cable: B072JPJ4MB
2 Nozzle and 2 Heat break for MK10 Makerbot Reprap 3D Printers:B073F6TD6Q
16Pack 33ft PLA 1.75mm Filaments: B071RPHQMJ
5 Nozzle & 5 Extruder for MK8 Makerbot Reprap Prusa I3 3D Printers:B071ZJP81Y

Product Features

  • Package Includes – 5 pack 3D Printer 0.4mm Extruder Brass Nozzle Print Head and 5 pack 3D Printer Extruder 1.75mm Stainless Steel Nozzle Throat(PTFF tube included).
  • Compatibility- compatible with all 1.75mm V6 Makerbot 3D printer, fits V6 1.75mm Extruder hot end.
  • General Installation – external thread connection.
  • Durable and heavy duty. Extruder Nozzle is made of brass, printer throat is made of stainless steel.
  • Attention: Small parts, please stay away from children.

Visit The Website For More Information…

SODIAL(R) 5PCS 3D printer accessories 36 teeth MK7 / MK 8 stainless steel planetary reducer extruder feed wheel extrusion wheel

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.
SODIAL(R) 5PCS 3D printer accessories 36 teeth MK7 / MK 8 stainless steel planetary reducer extruder feed wheel extrusion wheel
Pitch: 0.9MM
Pressure angle: 50 degrees
Distribution M3 Top wire
Colour:36 teeth MK7 / MK 8 planetary feed wheel
Package Contents:5 X 36 teeth MK7 / MK 8 planetary feed wheel
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Product Features

  • Material: metal
  • Outside diameter: 11MM
  • Inner hole: 5MM
  • Thickness: 11MM
  • Number of teeth: 36 teeth

Detailed Information available on our Homepage…

E3D V6 Hot End Full Kit, MYSWEETY 3D Printer J-head Hotend with Fan + 5 Pcs Extruder Brass Print Head + 5 Pcs Stainless Steel Nozzle Throat for RepRap 3D Printers

Specification of All Metal V6 Hotend Full kit:
12V/40W heater, the temperature can up to 280°C(Long-term temperature: 240°C/ short-term temperature: 280°C)
12V high speed fan with shroud
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 Tube Fitting

Specification of Extruder Tube:
Type : Nozzle Throat
Outer Thread : M6 M7
Nozzle Throat Outer Diameter:6mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 22.5mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of Brass Nozzle:
Type : Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm

Note:
Compatibility:Compatible with all 1.75mm V6 E3D Makerbot 3D printer

Attention: Small parts, keep away from children

Package Included:
1 x All Metal V6 hotend Sets
2 x 0.2mm Nozzle Print Head
2 x 0.3mm Nozzle Print Head
4 x 0.4mm Nozzle Print Head
2 x 0.5mm Nozzle Print Head
5 x 1.75mm Stainless Steel Nozzles Throat

Product Features

  • Package include: All metal v6 j-head hotend full kit + 10 pcs extruder brass nozzle print head + 5 pcs stainless steel nozzle throat.
  • 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280°C, 12V high speed fan, lose heat quickly.
  • Compatible with all 1.75mm e3d v6 makerbot 3d printer. Nozzle and tube connect seamless, prevent material leaking and blocking.
  • Hotend can be used for both direct feed and bowden applications. Good for ABS, PLA and other conventional print materials.
  • Easy to install, NTC connector with terminal, you can install directly(Hotend is equipped with NTC3950 thermistors).

Click Here If You Need More Detailed Info…