7.1“ LEVILUNA Magnetic Levitating Moon Lamp, Wireless Power Supply, Unibody Seamless 3D Printing, PLA Material, 6000K Cool White, Floating LED Light

LEVILUNA Magnetic Levitating Moon Lamp

NOTICE
Read the Instruction Carefully!
At First, It Would Be Pretty Difficult to Mount The Lamp Onto the Balance Point.
Keep Calm, Just Treat It As a Game.
If You Fail Many Times, Take A Break and Watch Our Guiding Video.
After A Few Successful Tries, You Will Be Practiced.
There Are 2 Wooden Plate to Assist Finding the Balance Point. It Is Not Suggested to Use Them.
Be Ware. On One of the Plate, There Is a Needle Covered By A Rubber. Don’t Forget to Cover It Again After Use.

Parameters:
Magnetic Force > 3N
Levitation Height : 8-12mm
Color Temperature : White 6000K
Light Power : 1W
Suggested Working Temperature : 0 ~ 40°C
Suggested Working Humidity: 10%~90%RH
Base Material : ABS
Lamp Material : High Transmittance PLA Material
Average Shell Thickness : 3mm
Voltage : 100~240V to 15/12V
Power : 6W
Moon Weight : 360g
Base Weight : 600g

Product Features

  • 【Magnetic Levitating】 – 3 Years of Technical Research & 5 Times super Magnetism, to Enable The Moon to Hover&Rotate in the Air Stably.
  • 【Wireless Power Supply】 – By Adopting Electromagnetic conversion, The Lamp Sphere Gets Rid Of Power Cord, Being Able To Float Independantly, Just Like the Moon.
  • 【Seamless Forming】 – a Unibody Moon Reproducing the Moon Surface Precisely by High-resolution 3D Printing.
  • 【Quality Guarantee】 Gurantee Refund or Replacement for Defective Lamps.

Check Out Our Website For Details…

KINGPRINT DC 12V 30A 360W Universal Regulated Switching Power Supply for 3D Printer, CCTV, Radio, LED Strip Lights,Computer Project

Basic requirements: 12V 30A 360W
Rated voltage range: 110-220VAC
Input voltage range: 110-220V
Input frequency range: 47 ~ 63Hz
Input voltage protection: 115 ~ 150% intermittent mode
Input voltage recovery: automatic recovery
Impact current: ≤1%
Machine efficiency: ≤ 0.5%
Output voltage range: 12V ± 0.5%
Output current: 30A
Ripple and noise: ≤100 mVp-p
Rise time: ≤50ms
Voltage regulation rate: ≤0.5%
Load regulation: ≤1%
Output over-current protection: current sag type
Output short circuit protection: IGBT
Output over-voltage protection: soft-start protection
Insulation resistance: > 50MΩ
High-quality materials, heat-resistant, dust-proof and moistureproof, flame-retardant, built-in cooling fan, safe and reliable, can guarantee better cooling effect, the service life of up to 20,000 hours

NOTE:
* This product is not waterproof, please be careful when you use it.
* This Power Supply is only suitable for indoor use, non-detachable power shell.
* Don’t place other items in the product range of 5 cm, to ensure the powersupply with good thermal environment and safety.
* Carefully verify the power link is correct rigorously, power lines reversed before use it. Don’t touch the case during the power is working.
* Don’t place other items in the product range of 5cm, in the range of 50cm within the outlet Do not place other flammable items.
* Do not short-circuit output if no output, please use off one minute re-energized.
* Professional installation of qualified electrician is highly recommended.
* If the power supply is defective, please contact us at first.

Package Included:

1 * 12V 30A Power Supply

Product Features

  • Dimensions: 21.5 * 11.5 * 5.0 cm /8.46*4.53*1.97 inch (L*W*H)
  • Operating temperature: -10 ℃ ~ +50 ℃, 20% ~ 95% RH (no condensation)
  • Storage temperature: -20 ℃ ~ +85 ℃, 20% ~ 95% RH (no condensation)
  • Temperature coefficient: 0.02 ~ 0.05% / ℃
  • Cooling method: fan cooling

Click Here For More Information

JoyNano 240W Switching Power Supply 24V 10A AC-DC Converter Transformer for 3D Printer, CCTV Surveillance LED Display Industrial Automation Stepper Motor and More [Upgraded Version]

JoyNano – Enjoy Gadgets and Electronics

Description:
1. The JoyNano 24V 10A Switching power supply is great electronic devices that operate on 24VDC and require less than 240W of power.
2. Constant voltage output to ensure the stability of the power supply. Efficient work and low temperature.
3. Input voltage 110V/230V is selected by switch. Before power on please check input voltage avoiding damage.
4. Safety Protection: Overvoltage protection, short circuit protection and overload protection. Hiccup mode, recovers automatically after faulty condition is removed.
5. Upgraded Glass-Fiber Board offers high performance of electrical insulation. Premium Transformer converts incoming line voltage to desired output load easily.

Specifications:
Input Voltage: AC110V/ 220V
Output Voltage: 24V DC
Output Current: 10A
Power: 240W Max
Screw Terminal Number: 9
Cooling: By free air convection.
Shell material: Aluminum case
Dimension: 200 x 110 x 50 mm (L x W x H) 7.8 x 4.3 x 1.9 inch
Net Weight: 690g 1.5lb

Wiring:
L, N, GND: AC power input
+V: DC power output “+”
-V: DC power output “-“
+V / ADJ: fine adjustment of output voltage

Environmental Requirement:
Working temperature: -10 to 50 degree Celsius
Storage temperature: -20 to 60 degree Celsius
Environmental humidity: 10-95%

Usage:
Switching Power Supply Driver for 3D Printer, LED Strip Light, CCTV Surveillance, Industrial Automation, CNC Stepper/Servo System, DSP controller, LED Decorative Lighting, LED Display, Stage Lighting, Communications, Network, etc.

Notice:
1. In-door use only.
2. Professional Installation of qualified electrician is highly recommended.

Package Included:
1 x JoyNano 240W Switch Power Supply 24V 10A

Product Features

  • Converts AC voltage to 24V DC. LED Indicator.
  • Output Current 10 Amp, Power 240 Watt. Efficiency more than 80%.
  • Smart device surge protection for Shortage Protection, Overload Protection, Over Voltage Protection
  • Widely used in 3D Printer, Industrial automation, LED display, communications, CNC Stepper, etc
  • Efficient, long life, stable, and reliable – JoyNano Quality Warranty

Click Here For More Information

SUPERNIGHT DC 12V 30A 360W Universal Regulated Switching Power Supply Power Driver for 3D Printer , HAM Radio Transceiver , Car Subwoofer amp Audio Amplifier and RC LiPo Chargers

IN-DOOR USE ONLY!

Technical Specifications:
Manual Switch between 115V and 230V Input ,+ / – 10% adjustable output voltage.

Auto on/off cooling fan.
High Efficiency, Low Temperature,High reliability.
LED indicator for power on.
Built-in EMI Filter.
Gross Weight: 2 lb
Color: White

Compatible with:
Suitable for CCTV, Radio, Computer project .

Package:
1 x Switch Power Supply Driver For LED Strip lights.

Product Features

  • Over Load and Short Circuit Protection
  • Over Voltage Protection
  • Auto-recovery after protection
  • AC input: 100-120V; 200-240V
  • Output: 12V , 0 ~ 30A

Click Here For More Information