Aibecy Creality 3D Extruder Back Support Plate with Pulley 3D Printer Parts Accessory Extruding Backplate for Ender 3 Ender 3 Pro CR-10 CR-10S S4 S5 Series 3D Printers 1Pcs

Features:
A perfect extruder back support plate accessory.
Suitable for Ender 3, Ender 3 Pro, CR-10/ CR-10S/ S4/ S5/ series 3D printer, etc.
With 3 pulleys on the plate, for perfect working with the 3D printer.
Easy to install, very convenient.
Made of high quality metal and plastic material, very durable.

Specifications:
Brand: Creality 3D
Material: Metal & Plastic
Color: Black
Item Size: 6.2 * 4.5 * 2cm / 2.4 * 1.8 * 0.8in
Item Weight: 87g / 3.1oz
Package Size: 15 * 13 * 3cm / 5.9 * 5.1 * 1.2in
Package Weight: 94g / 3.3oz

Package List:
1 * Extruder Back Support Plate

Product Features

  • A perfect extruder back support plate accessory.
  • Suitable for Ender 3, Ender 3 Pro, CR-10/ CR-10S/ S4/ S5/ series 3D printer, etc.
  • With 3 pulleys on the plate, for perfect working with the 3D printer.
  • Easy to install, very convenient.
  • Made of high quality metal and plastic material, very durable.

Visit The Website For More Information…

BIQU 3D Printer Part SKR Mini V1.1 32bit Control Board Marlin 2.0 Open Source Compatible with Ramps1.4/1.5/1.6 Support A4988/8825/TMC2208/TMC2100 Drivers (DC Connector)

SKR Motherboard Parameters:
Appearance size: 90*70mm
Mounting size: 80*60mm
Microprocessor: ARM Cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-12A
Motor driver: support TMC2208, TMC2130, ST820, LV8729, DRV8825, A4988
Motor drive interface: X, Y, Z, E0, Four(Serial Dual Z-axis), Up to 256 subdivisions
Display: 2.8 “TFT, 3.5” TFT
Temperature Sensor Interface:TH0、TB, two 100K NTC thermistor

Notice:
When the SKR motherboard is electricity , the red light D2 in the lower right corner will light up, indicating that the power supply is normal. The middle of the Board DC SEL is the power selection end
1, when using USB to power the motherboard, short circuit cap should be used to connect +5V and USB Pins
2, when using 12v-24v power supply, short circuit cap shall be used to connect +5V and INT pins

Attention: Can be connected [12v-24v power], [USB] at the same time , the printing process must be connected with a short circuit cap +5V And INT
3,The Board 5V SEL must be connected to INT and +5V two pins before it going to print 4,It must be connected with an external hot bed MOS Extension Module if you need to use with Heatbed, it is very significant that Motherboard can not connect with heat bed directly.

How to use
The SKR motherboard connects with the computer via the [USB] interface. After the driver is installed, the motherboard can be inserted into the computer to recognize the port for data transmission. Without the driver installed, it is easy for the computer to not recognize the USB port

1,The driver can be obtained from our open-source website: https://github.com/bigtreetech, named by “mapleDrv” file
2. After installing the driver, connect the computer and SKR motherboard with USB cable
If you need more information about this Board please contact us

Product Features

  • Using 32bit frequency 72MHz ARM Cortex-M3 series STM32F103RCT6 main Microprocessor, the performance has been greatly improved
  • Support Resume Printing While Power Off,Filament Break Detection,Automatic Shutdown After Printing and other functions
  • SKR Mini V1.1 Board adopt “Gold Finish” process which capability is more stable and better heat dissipation
  • Support 2.8 and 3.5 Inch Touch Screen,2004LCD (but don’t Support 12864 LCD)

Visit The Website For More Information…

Dow Chemical Water Soluble, Dissolvable Support 3D Printer Filament 1.75mm (.5 lb Spool)

Imagine using only one support material for every type of filament you print with. Then imagine that material also being soluble in water, allowing it to be washed away easier and safer, without hazardous caustic baths. You don’t have to imagine any longer. EVOLV3D USM from Dow is here. No more having to stock multiple support materials or guessing about which material is right for your project. EVOLV3D USM overcomes limitations of other support materials through its compatibility with a broad array of popular build materials, a broader print temperature range, easy removal through tap water dissolution at room temperature, and safer disposal of the solution.

These features significantly increase the design space for additive manufacturing innovators to build complex and functional parts with an array of materials that may have previously been impossible. 3D printing is often done outside of industrial settings (homes and offices) by users who may not have chemical handling training. As a non-hazardous material that does not use harsh reagents or generate harmful waste, EVOLV3D USM reduces handling concerns for these individuals and has an improved environmental profile.

Key Benefits

Universal – Works with a broad array of popular build materials

Wide Working Extrusion Temperature Range – Wide Extrusion Temperature Range: 200C – 250C

Cost-efficient – No need to stock multiple support materials

Easy to remove – Dissolves in tap water at room temperature

Safe to handle – No harsh chemicals needed for cleanup

Sustainable – Can be washed down the drain

Product Features

  • Universal Support Material for PLA, PETG, Nylon, ABS and Other Popular Filaments
  • Dissolves in Tap Water
  • Wide Extrusion Temperature Range: 200C – 250C
  • Exclusively Made by Dow Chemical
  • .5lb Spool – 1.75mm

Check Out Our Website For Details…

BIQU 3D Printer Part SKR V1.3 32bit Control Board Smoothieboard&Marlin Open Source Compatible with Ramps1.4/1.5/1.6 Support A4988/8825/TMC2208/TMC2100 Drivers

Product Description
BIGTREETECH SKR V1.3 motherboard is R&D by Shen Zhen Big Tree Technology CO.,LTD. .The BIGTREETECH SKR V1.3 motherboard not only with a high cost-effective but especially suitable for small and medium-sized 3D printers

How to Work
The SKR motherboard connects with the computer via the [USB] interface. After the driver is installed, the motherboard can be inserted into the computer to recognize the port for data transmission. Without the driver installed, it is easy for the computer to not recognize the USB port

1. Smoothieware-usb-driver-v1.1 driver installation (Windows systems only) The driver can be obtained from our open-source network
Https://www.dropbox.com/s/ighnj7oa2l0bm5g/smoothieware-usb-driver-v1.1.exe?dl= 0
2. After installing the driver, connect the computer and SKR motherboard with USB cable
Note: When using smoothieware open-source firmware, since only Windows system drivers, the SKR board at this time can only be recognized by the Windows system port! ! !
3. If you are using Marlin2.0 firmware, follow the tutorial to install:
Tutorial:https://www.dropbox.com/s/ppjfflhf3j5yzh2/MarlinV2.0%20SKRV1.1%20instruction.docx?dl=0

Product Features

  • Using 32-bit main frequency 100MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved
  • Reserved extended port SERVOS of PWM signal to support BL Touch
  • Support Resume Printing While Power Off,Filament Break Detection,Automatic Shutdown After Printing and other functions
  • The SPI working mode of the TMC2130 driver and the UART working mode driven by the TMC2208, which eliminates complex wiring process and can be used by simple unplugging jumper cap
  • SKR V1.3 board has CE Certification to adopt 4-Layer PCB with “Gold deposition technology” which capability is more stable and better heat dissipation

Visit The Website For More Information…