Window-pick Flex Magnetic Print Tape 235235mm/9.259.25in Tape Hot Bed Sticker Plat Backplane A-Side + B-Side Build Surface Tape for Creality DIY 3D Printer Accessories Ender-3

Description:

Size: about 235*235mm/9.25*9.25in

Advantage:

1. It can be used repeately for saving money.

2. Separation type bending to take the model. It’s more convenient.

3. Do not need the beauty of paper and scraper to assist the model.

4. Can be installed on a hot bed and a glass platform.

5. Print without warped edge. No glue is needed.

6. Can be printed on cold bed.

7. The A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models.

8. The surface of A plate is able to resist high temperature to around 120 – 150 ℃ in short time.

9. The A B plates are flatness.

10. It can print a variety of materials such as PLA and so on.

Pay Attation:

* Please level the build plate well before printing.

* Please do not let heated nozzle touch the A plate directly !

The product includes two parts: Part A+Part B

Part A: The top is a matte surface (the same as other stickers), and the back is magnetic (the interaction with the front of Part B )

Part B: The top is magnetic (with the adsorption under the A part), the back is the adhesive (posted on the printer platform for fixing)

Product Features

  • It can be used repeately for saving money.Separation type bending to take the model. It’s more convenient.
  • Do not need the beauty of paper and scraper to assist the model.Can be installed on a hot bed and a glass platform.
  • Print without warped edge. No glue is needed.Can be printed on cold bed.
  • The A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models. The surface of A plate is able to resist high temperature to around 120 – 150 ℃ in short time.
  • The A B plates are flatness.It can print a variety of materials such as PLA and so on.

Detailed Information available on our Homepage…

CactusAngui Magnetic Print Bed Square 200mm Flex Sticker Build Plate Tape 3D Printer Parts

Specifications:
It can be used again and again.
Separation type bending to take the model, convenient to use.
Can be installed on a hot bed and a glass platform.
Print not warped edge, no glue is needed.
This product consists of A plate + B plate sticker.
The A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models.
The B plate has magnetic upper side and sticky back.

Type: Print Build Plate Tape
Material: Magnetic Print Bed Tape
Features: Magnetic, Easy to Use, 3D Printer Accessories
Size: 20cm x 20cm/7.87″ x 7.87″ (Approx.)

Notes:
Due to the light and screen setting difference, the item’s color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.

Package Includes:
1 Set of Print Build Plate Tape(A Plate + B Plate Sticker)

Product Features

  • It can be used again and again.
  • Separation type bending to take the model, convenient to use.
  • Can be installed on a hot bed and a glass platform.
  • This product consists of A plate + B plate sticker.
  • The A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models.

Visit The Website For More Information…

4″ in WIDE 3D Printing LOW TEMP Blue Painters Tape Masking Clean Release Easy Removal NO RESIDUE 3D Printer bed grip deck cover EZ Easy Print Removal 60 Yd 4″ Inch

3D printing enthusiasts will LOVE this tape! Cover your printer bed deck for easy removal of prints and replace tape easily as it wears. 3D printers do not come with good surfaces for easy print removal.

This Blue Painters Tape features a specially formulated, high tack adhesive. Works for textured, semi-rough, or smooth surfaces and has the tackiness it needs to adhere to your surfaces yet allows for clean removal up to 21 days. Heat from prints will greatly affect this however!

High performance masking tape is for general industrial, construction, and do-it-yourself use. The acrylic adhesive system will not dry out or lose holding power. Works well on drywall, glass, hardwood floors, wood trim, and a variety of surfaces. Most typical use is LATEX paint jobs and window protection mask off.

Very Important: Surfaces must be well cleaned, dust free, greaseless, and very dry before application. While the backing of the tape is moisture resistant the adhesive is definitely not. ALL adhesive is pressure & heat sensitive. Make sure you press it firmly after application. Apply at room temperature or above if possible. The dryer and warmer the installation area, the more you run your fingers over it, the better the adhesion (less bleed). REMOVE ASAP! (always pull gently at slight angle AWAY from painted edge) Painters tape is known as semi-permanent removable, it gets stronger every day. The longer you leave it on the more difficulty removing it. Rolled or brushed paint jobs require much sooner removal than sprayed.

Blue Painters Tape is not for everything! May not play well with all types of oil based paints, lacquers, etc. You must be willing to experiment, there are 100’s of kinds of tape for a reason.

Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, Over spray protection, Chrome protection when cutting or grinding.

Product Features

  • Premium #1 Grade USA MADE Product – Thicker paper, Stronger adhesive for Contractors & Pros
  • 6 Mil High Tack creped backing, 22.0 steel adhesion, 20 lb tensile strength, 9% elongation
  • UV Resistant for 10 days up to 150 degrees outdoors, 40-125 indoor range for 21 day clean removal
  • 3D Printer bed print surfaces – Strong, flexible, durable, versatile – broad range of applications
  • Dispenser friendly, Pulls off roll VERY quick without tearing, needs LESS pressure to stick down.

Click Here For More Information

3D Printing Build Surface Tapes 3D Printer Plate Tape 9.8″x8.3″ 30 Sheets

Description:

If you are the 3D printing enthusiasts, you must love this tape

Single sheets make it easy to apply and remove tape from the build plate

Cover your printer bed deck for easy removal of prints and replace tape easily as it wears

Professional grade multi-use contractors tape featuring a specially formulated, high tack adhesive

Works for textured, semi-rough, or smooth surfaces, ideal for painted walls and trim, woodwork, glass and metal

Specification:

Color: blue

Dimension: 9.8″x8.3″ L x W

Number of Items: packages of 30 sheets

Website URL:

For more information and products, please visit: www.amazon.com/shops/affinityinc

Product Features

  • Perfect tape to use for your 3D printer
  • Easy to apply and remove, doesn’t easily tear
  • Covers most 3D printer print beds with one single piece
  • Removes cleanly without adhesive transfer or surface damage
  • Adheres quickly and easily to a painted walls, trim, wallpaper, glass and wood

Click Here For More Information