1.75mm MK8 0.4mm Nozzle Thermocouple Extruder Hotend for Prusa i3 3D Printer 12V

Material: Aluminum & Stainless Steel & Brass
Installation type: external thread connection
Scope of application: 3D printer
Nozzle size: 0.4mm
Throat pipe length: 30mm
Aluminum block size: 20 mm x 20 mm x 10 mm
Operating temperature range? -40 ~ +260°C (-40 ~ +500 °F)
Thermistor and heater cable length: 1M
Tip of the nozzle, aluminum heating block, Throat pipe (built-in Teflon).
MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V40W.

Compatible with: Canon IP4500/5300, MP610/810, MX850

Product Features

  • High Quality and Fast Ships from USA
  • This is an Aftermarket Part.
  • Package Included: 1 x Aluminum block ,1 x Heating tube (heating tube 1 m long, 12V 40W) ,1 x 1.75MM 0.4MM Brass Nozzle ,1 x M6*30mm Throat pipe (built-in Teflon) 1 x Thermistor + Brass sleeve (1 meter long)

Visit The Website For More Information…

BephaMart 5Pcs K-type Temperature Sensor Thermocouple Shielded For Makerbot 3D Printer

BephaMart 5Pcs K-type Temperature Sensor Thermocouple Shielded For Makerbot 3D Printer

Product Features

  • BephaMart 5Pcs K-type Temperature Sensor Thermocouple Shielded For Makerbot 3D Printer

Click Here For More Information

INKBIRD 12″ Stainless Probe NTC-30CM Sensor Thermocouple w/ DC Cord for ITC-1000,ITC-306T, ITC-308S, ITC-310T Thermostat Temperature Controller


Features:
NTC Temperature Sensor 12in Stainless Stell Probe with 6.5ft DC cord
This temperature probe can be submersed into your beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s ONLY compatible with INKBIRD’s following controllers: ITC-308,ITC-306T,ITC-310T, ITC-1000.

Measuring temperature range: -50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions: 6mm x 300mm (0.24in x 12in)
Cord Length (excluding probe): 2m (6.5ft)

Package Included:
1 x 12″ Probe Sensor
1 x 10cm DC Cord cable

Product Features

  • NTC Temperature Sensor 12in Stainless Stell Probe with 6.5ft DC cord
  • It’s ONLY compatible with INKBIRD’s following controllers: ITC-308,ITC-306T,ITC-310T, ITC-1000.
  • The sensor is waterproof and is better for the freshwater tank than the saltwater tank.
  • Can be submersed into your beer direclty during fermentation.
  • Easy to use

Detailed Information available on our Homepage…

MAX6675 Module + K Type Thermocouple Sensor Set for Arduino 3D Printer

Chip: MAX6675Working Voltage: DC 5VOperature Current: 50mATemperature Measurement Range: -200C to 1300C(Predure test for 0-1023C)The Temperature Measurement Accuracy: +/-1.5CThe Temperature Resolution :0.25CThe Output mode:SPI digital signalWith a Fixing hole for easy to fix and install.Storage temperature:-50 to +150CThermocouple Lead Length: 50cm/20inchPackage Content: 1x MAX6675 Module, 1x K type Thermocouple

Product Features

  • Country of Manufacture: CHINA; Material: Electric Parts; Net Weight: 22g
  • Package Content: 1 x MAX6675 Module; Model: MAX6675
  • Working Voltage: DC 5V; Working Current: 50mA
  • Temperature Measurement Range: -200C to 1300C; Module Size: 25mm x 15mm (L*W)
  • Thermocouple Lead Length: 50cm/20inch; Thermocouple Type: K Type

Visit The Website For More Information…