SODIAL 3D printer accessories motherboard control board MKS GEN-L V1.0 compatible ramps open source marlin

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.
SODIAL(R) 3D printer accessories motherboard control board MKS GEN-L V1.0 compatible ramps open source marlin
Use CH340 serial port chip, more easily install the drive than 16U2.8. Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4.Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32.Available to input 24V, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats.
X axis, Y axis and Z axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.Plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board damage.
Name: MKS-Gen-L V1.0 Controller Board
net weight: 0.1KG
colour: black+yellow+red
Material: metal
Package Contents:
1pcs * MKS-Gen-L V1.0 Controller Board
1pcs * USB line(Random color, don’t accept the specified color. )
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Product Features

  • Aiming at the problems exist on the open sourced controller board such as Ramps 1.4, the developers in Makerbase specially optimize and develop a new product, MKS Gen_L, which provides more flexible choices for users.
  • 2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors.Support a variety of stepper drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change the stepper drivers and motors as users like.
  • Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors.
  • Use high-quality MOSFET, better cooling and more stable.Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage.Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing.

Detailed Information available on our Homepage…

Turnigy Mini Fabrikator 3D Printer v1.0 Spare Parts – Extruder Set

Turnigy Mini Fabrikator 3D Printer v1.0 Spare Parts – Extruder SetIncluded:1 x Extruder SetNote:Does not include Motor.

Visit The Website For More Information…

Turnigy Mini Fabrikator 3D Printer v1.0 Spare Parts ?�? Metal Set 1

Turnigy Mini Fabrikator 3D Printer v1.0 Spare Parts Metal Set 1 Included: 4 x ARCL_S Nylon 12 x Oilless bushing (4x8x8) 6 x Bearing (3x9x5) 17 x Nut M3 x 0.5 6 x Spacer HexNut 4.75x6mm-M3 15 x Washer (3x7x0.5) 2 x Linear shaft D4x181mm 2 x Linear shaft D4x131mm 2 x Linear shaft D4x140mm 1 x M3 Thread rod for Z axis 1 x Z rod coupling

Visit The Website For More Information…

TriGorilla MKS BASE V1.0 3D Printer Control Motherboard Compatible RepRap Ramps1.4 With USB Cable

Specification:
Can accept 24 v input, under the same system power can reduce the current hot bed to 1/4, effectively solve the problem of hot bed MOS tube heating
The firmware can use open source firmware Marlin, configuration are exactly the same with ramps1.4 , can be directly replace ramps1.4 also
Can be connected directly to Ramps1.4, 2004 LCD control board and the LCD board (12864)
Package Contents:
1 x MKS-BASE V1.0
1 x USB cable

Product Features

  • It gather all function on one board, which solved the Ramps1.4 combination interface problem, which easily out of order
  • Using 4982 as a motor drive, the SOP package, the effect of heat dispelling is better
  • Circuit board uses the high quality of 4 layer board,optimize heat dissipation;Ramp Is 2 layer board
  • Using special power supply chip, support the 12v-24v power input, solve the problem of Ramps voltage conversion of chip fever

Detailed Information available on our Homepage…