WitBot TMC2208 V2.1 New Upgraded  Silent Stepper Motor Driver Suit MKS GEN V1.4 / MKS GEN L/SKR Control Board for 3D Printer Parts(Pack of 5pcs)

1.Work mode: PASS / DIR / UART
1.PASSO / DIR Mode:

2. advantages of the UART 2 modes:
1)The motor current can be arbitrarily set by the firmware;
2)Micro-can be arbitrarily set by the firmware (up to 256 real micro-The real and interpolated micro-can be combined to get the maximum torque;
3)The firmware can dynamically switch the stepper motor between stealthChop2 and spreadCycle mode via the UART;
4)When the motor is not moving, the standby current motor can be dynamically reduced (via the UART)

Note:
1.Hardware selection When using the UART operating mode, use a soldering iron carefully to prevent burns and handle after observing, carefully observe whether the module has residual tin slag. It must be cleaned to prevent it.Cause the module to be short-circuited.
2.Pay attention to the line sequence and IO port when wiring. Connecting the wrong line will directly cause the driver to not work.Carefully connected to the above illustration.
3.When plugging the driver into the motherboard, pay attention to see the driving direction, never insert it, and prevent the drive burned.
4.Be sure to do the heat dissipation work (heat sink + cooling fan) before driving to prevent driving.

NOTE:
Note:If you are having trouble using it, or if you need to use the instructions, please contact me after placing your order.

Product Features

  • TMC2208 V2.1 is a newly upgraded driver module. Compared with TMC2208 V2.0, V2.1 puts the chip inside, which is more conducive to heat dissipation.
  • TMC2208 single-axis chip stepper motor drive, power supply tube built-in pilot current 1.4A peak current 2A, voltage range of 4.75V-36V, 256 subdivision; With the patented spreadCycle technology of high frequency chopper, dcStep , stall stallGuard2 , sensing technology, CoolStep dynamic current regulation technology, can save 70% energy.
  • Flexible microPlyer interpolation unit, the component can provide up to 256 microstep / step resolution, even in the wrist frequency system is limited may still be perfect to achieve sinusoidal control; as stealthChop end music technology is widely used in 3D printing, so that these components are also designed to be compatible with current electronic 3D printer, eliminating the need for expensive redesign. Both components have input pulse / direction, can be completely independent operation. Th

Visit The Website For More Information…

[Gulfcoast Robotics] Z-Brace Frame Support Kit for Wanhao Duplicator i3 and Maker Select V1, V2 and V2.1 3D Printers

This kits is a result of our effort to improve existing and popular Z-brace kits based on 3D printed parts. Our kit is fully metal kit, no printed parts. It looks minimal compared to the 3D printed Z-brace designs, but it will make your frame completely stable, just like other similar kits.

In our kit we use ball joints to eliminate any tension created by misalignment between upper and lower bracket. Off shelf M5 ball rod ends are making our Z-brace design simple and clean looking.

Convenient feature of our kit is ability to allow fine adjustment of the each Z-rod length. Z-Brace rod design is based on turnbuckle principle – each rod will extend and contract by turning tube clockwise or counterclockwise. When you are done with adjustment – just tighten counter nuts on each rod end to get rid of any small play and you will make your adjustment permanent. After you tighten counter nuts your frame will become completely solid and stable.

Product Features

  • Compatible with Wanhao Duplicator i3 and Maker Select V1, V2 and V2.1 3D Printers
  • For Maker Select PLUS 3D Printer please use other kit sold in our store
  • CNC machined all metal design. Black anodized parts will look great on your 3D Printer
  • Designed and manufactured by USA company

Click Here If You Need More Detailed Info…

Wanhao Duplicator i3 V2.1 3D Printer

Wanhao’s Prusa i3 lineup is perhaps one of the best available in the market. Assembled and calibrated in factory and sporting an aluminium frame, the Wanhao Prusa i3 V2.1 is an excellent choice for businesses and enthusiasts alike. Quality comes with every Wanhao order. The Prusa i3 V2.1 sports a MK10 single extruder, which can print various filaments at generous print speeds. The i3 V2.1 comes with a heated plate and a special Wanhao build surface, minimizing warping and maximizing adhesion. All this technology is wrapped in a durable metal shell, ensuring endless hours of quality prints. This product comes assembled and semi-calibrated, but comes with up-to-date instructions.Â

Product Features

  • Large peer-to-peer support group
  • An affordable, assembled 3D printer
  • Metal frame for durability and rigidity
  • Quality printing from a reputable manufacturer
  • Ships directly from Wanhao

Click Here For More Information

RepRap Champion Z-Brace Frame Support Upgrade Kit for Wanhao Duplicator i3 and Monoprice Maker Select V1, V2 and V2.1 3D Printer

This kits is a result of our effort to improve existing and popular Z-brace kits based on 3D printed parts. Our kit is fully metal kit, no printed parts. It looks minimal compared to the 3D printed Z-brace designs, but it will make your frame completely stable, just like other similar kits.

In our kit we use ball joints to eliminate any tension created by misalignment between upper and lower bracket. Off shelf M5 ball rod ends are making our Z-brace design simple and clean looking.

Convenient feature of our kit is ability to allow fine adjustment of the each Z-rod length. Z-Brace rod design is based on turnbuckle principle – each rod will extend and contract by turning tube clockwise or counterclockwise. When you are done with adjustment – just tighten counter nuts on each rod end to get rid of any small play and you will make your adjustment permanent. After you tighten counter nuts your frame will become completely solid and stable.

Package contents:

2 x Aluminum tubes pre-assembled with 2 x M5 steel ball rod ends (left hand and right hand threaded) and 2 x M5 counter nuts (left hand and right hand threaded).
2 x Lower mounting brackets.
2 x Upper mounting brackets.
10 x M3x8 socket head screws.
5 x M5x12 socket head screws.

Product Features

  • Very stiff all metal construction
  • High quality CNC machined parts
  • Black anodized parts will look and feel like part of original frame design
  • Each support rod can extend or contract to adjust frame to right angle.
  • Designed and manufactured by USA company

Detailed Information available on our Homepage…