FYSETC 3D Printer Leveling Parts, Heat Bed Silicone Leveling, Column OD 0.63 in ID 0.16 in Stable Hot Bed Tool Heat-Resistant Silicone Buffer for Anet A8 Wanhao D9 Anycubic Mega,4 Pack Black

FYSETC is focus on 3D Printing Accessories, offers a variety of quality 3D Printing parts. We are constantly improving its products to deliver the best experience to each customer.

These silicone buffers serve to replace on your heating bed original springs. It is stable and does not shake when used, better to keep your 3D printer leveled.

Model: 4 high silicone leveling column -black
Feature: Assist 3d printer leveling
Material: Silicone
Silicone: Heat-resistant and pressure-resistant
Diameter: OD 0.63″(16mm) ID 0.16″(4mm)
Height: High 0.71″(18mm)
Package Includes:
4x high silicone leveling column- black

Product Features

  • For 3D Printer Hot Bed/ Platform, bottom connect, can replace original spring leveling.
  • New upgraded 3d printing leveling tool , Special design for Anet A8 Wanhao D9 Anycubic Mega i3 and most heated bed.
  • This heat-resistant and pressure-resistant silicone leveling column with a 4mm inner diameter makes it better to level your 3D printer.
  • The silicone buffers are simply installed instead of the original spring and it is no longer possible movement, your set levels remain!
  • After Sales Guarantee: each one desfective item can have the free replace or refund, need more help please feel free to email or Q&A us, we will try our best to service you.

Visit The Website For More Information…

[Gulfcoast Robotics] Thermistor Upgrade for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers.

Our thermistor can replace stock thermistor in Duplicator i3 / Maker Select V1, V2, V2.1 and Plus 3D Printers. Thermistor assembled with 600C rated ceramic glue and fiberglass insulation wires. Wiring insulation can withstand much higher heat than stock PTFE insulated thermistor, it will result in longer service life and you also can print more different materials on your printer without damaging thermistor.

NTC 3950 HEX thermistor features:

M3x0.5 threaded stud to use in place of M2 clamping screw on MK10 extruder heater block.
Wiring insulation: fiberglass.
Wiring length: 130mm.
Connector type: JST XHP.
NTC 100K thermistor 3950K beta A value.
Use TEMP SENSOR number 11 in Marlin.
High accuracy: 1%.
Resistance value at 25°C=100K

Package contents:

1 x HEX stud NTC 3950 100k Thermistor for Wanhao / Maker Select.

Product Features

  • Drop-in replacement for stock thermistor on MP Maker Select Plus / Wanhao Duplicator Plus
  • Also compatible with MP Maker Select V2.1 and Wanhao Duplicator V2.1
  • Easy to mount with M3 HEX stuв
  • Can hold temperature up to 300C with ceramic glue and fiberglass insulation on leads
  • Designed and manufactured by USA Company

Visit The Website For More Information…

FYSETC 3D Printer Heated Bed Platform, 8.7X 8.7 in New Flex Magnetic Hot Bed Build Surface 2 in 1 with Adhesive Backing for Anet A8 A6 Prusa i3 Wanhao i3

Feature:
Reuse, easy remove;
Separation type bending to take the model. It’s more convenient.
No need the beauty of paper and scraper to assist the model.
Print not warped edge. No glue is needed.
Can be printed on cold bed.

Please kindly note:
If it doesn’t stick, please don’t worry, rotate the magnetic A side 90 degrees, match to the polarity.
Please level the build plate well before printing.
Please do not let heated nozzle touch the A plate directly !

Package includes:
8.7″ A Plate+B Plate

Product Features

  • 2018 Upgrade 3D Printer Heatbed Plate Sheet: can install on a hoted bed and glass platform, fit for prusa i3, MEGA, Anet A8, Creality Ender 3 and more Printer.
  • 2 in 1 Plate: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models, B plate with 3M adhesive, stick on the build surface.
  • Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 80 degrees centigrade) should not exceed 80 degrees. so It is work well for PLA, not suitable for ABS, or the platform will comes bent . if set heated beyond 80 degree, it will lose magnetism or turn bent.
  • Size: 220x220mm/ 8.7×8.7 inch
  • After-sales Support: each one defective item can have the free replace or refund, If need further please fell free to email or QA us, we and our engineers are very happy to assist you.

Click Here For More Information

[Gulfcoast Robotics] Z-Brace Frame Support Kit for Wanhao Duplicator i3 and Maker Select V1, V2 and V2.1 3D Printers

This kits is a result of our effort to improve existing and popular Z-brace kits based on 3D printed parts. Our kit is fully metal kit, no printed parts. It looks minimal compared to the 3D printed Z-brace designs, but it will make your frame completely stable, just like other similar kits.

In our kit we use ball joints to eliminate any tension created by misalignment between upper and lower bracket. Off shelf M5 ball rod ends are making our Z-brace design simple and clean looking.

Convenient feature of our kit is ability to allow fine adjustment of the each Z-rod length. Z-Brace rod design is based on turnbuckle principle – each rod will extend and contract by turning tube clockwise or counterclockwise. When you are done with adjustment – just tighten counter nuts on each rod end to get rid of any small play and you will make your adjustment permanent. After you tighten counter nuts your frame will become completely solid and stable.

Product Features

  • Compatible with Wanhao Duplicator i3 and Maker Select V1, V2 and V2.1 3D Printers
  • For Maker Select PLUS 3D Printer please use other kit sold in our store
  • CNC machined all metal design. Black anodized parts will look great on your 3D Printer
  • Designed and manufactured by USA company

Click Here If You Need More Detailed Info…