WINSINN 3D Printer Extruder, Works with Creality Ender 3 5 CR10 CR-10 CR-10S Upgraded Aluminum RepRap Prusa i3 for MK8 Drive – Red


►Classic Red color.

►UPGRADE: Perfect replacement for Creality 3D Printers ENDER3, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.

►This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware.

►Support: 1.75mm Filament .

►This Kit NOT include the instruction manual, we need to DIY 🙂

—————————————————————————————————————

Package include:
►1 x WINSINN CR-10 extruder Upgrade Kit (All Accessories show as Picture 1)

Product Warranty:

-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.

Product Features

  • ✔️Classic Red color.
  • ✔️UPGRADE: Perfect replacement for Creality 3D Printers Ender 3, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
  • ✔️This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware.
  • ✔️For 1.75mm Filament. This Kit NOT include the instruction manual, we need to DIY 🙂
  • ✔️Made by WINSINN, make sure the “WINSINN” label on the box for our after-sales service.

Visit The Website For More Information…

WINSINN Ender 3 Dual Gear Extruder CR10 Pro Upgraded Aluminum Dual Extrusion Drive Feed 3D Printer Extruder for Creality CR-10 Pro CR-10S Ender 3 Tornado 1.75mm Filament


New Double Gear Extrusion Mechanism.

►UPGRADE: Perfect replacement for Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc.

►High quality Double gear extrusion, All-metal aluminum alloy, stable and durable.

►Support: 1.75mm Filament .

►This Kit NOT include the stepper motor and instruction manual, we need to DIY 🙂

—————————————————————————————————————

Package include:
►1 x WINSINN CR-10 Pro extruder Upgrade Kit (All Accessories show as Picture 2)

Product Warranty:

-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.

Product Features

  • ✔️New Double Gear Extrusion Mechanism.
  • ✔️UPGRADE: Perfect replacement for Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc.
  • ✔️All-metal aluminum alloy, High quality dual gear extrusion, stable and durable.
  • ✔️For 1.75mm Filament. This Kit NOT include the stepper motor and instruction manual, we need to DIY 🙂
  • ✔️Made by WINSINN, make sure the “WINSINN” label on the box for our after-sales service.

Detailed Information available on our Homepage…

WINSINN Titan Extruder Bowden Hotend Drive Feed Kit for RepRap Prusa i3 J-Head V6 Makerbot MK8 MK10-3D Printer Universal Upgrade Part 1.75mm 3mm Nozzle Filament


►This is a Optimized version of 3D Printer Extruder. It is very light and compact. It can use a lighter motor, any Bowden-type 3D printer can become a powerful, reliable little beast. It is easy to manually squeeze, remove, load and unload Filament.
At the same time, You only need a hex wrench, you will be able to within a minute to remove the Titan, regardless of the opening and assembly are very easy and fast.

—————————————————————————————————————

►Installation Points: The top surfaces of the two gear s must be flush adjust the pinion accordingly

►We have done thousands times of tests, including strength testing, time testing and so on. It really works well. Let’s try it:))

—————————————————————————————————————

Package include:
►1 x WINSINN Extruder Full kit (All Accessories show as Picture 2)
►Note: This Kit NOT Included Motor, V6 Hotend, Titan Aero

Product Warranty:

-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.

Product Features

  • ✔️Compatible with E3D-V6 Hotend and Titan Aero Upgrade Kit
  • ✔️High quality Titan extruder, Very easy to upgrade your printer
  • ✔️Filament:1.75mm 3mm PLA / ABS / Flexible / other
  • ✔️Suitable For Remote and Short distance
  • ✔️Note: This Kit NOT Included Motor, V6 Hotend, Titan Aero

Visit The Website For More Information…

WINSINN 3D Printer Controller Kit for Arduino Mega 2560 Uno R3 Starter Kits + RAMPS 1.6 Upgraded Mosfet + 5Pcs DRV8825 Stepper Motor Driver + LCD 12864 for Arduino Reprap


Ramps 1.6 board:

-Ramps 1.6 is optimized and launched based on Ramps 1.4 & Ramps 1.5. The Struture almost same as Ramps 1.5 , the difference is Ramps 1.6 have new 2pin connectors,which more simple and convenient to connect,also will not be burnt easily. And Ramps 1.6 have a good Heatsink above MOS tube in order to give a better function to heat dissipation. Beside, the Power of Ramps 1.6 is more larger than Ramps 1.5, the largest power will be up to or 270W, and Ramps 1.5 just can be up to 200W, or smaller than 200W.

DRV8825 Driver:

-Suitable for driving below 8.2V ~ 45V 2.5A stepper motor
-Six different stepping resolutions: full, half, 1/4,1/8,1/16,1/32
-Adjustable potentiometer can adjust the maximum output current, resulting in higher step rate
-Automatic current decay mode detection / selection
-Thermal shutdown circuit, undervoltage lockout, crossover current protection
-Ground short-circuit protection and load short-circuit protection

Mega 2560 R3:

-Operating Voltage: 5V
-Input Voltage (recommended):7-12V
-Input Voltage (limits):6-20V
-Digital I/O Pins:54 (of which 14 provide PWM output)
-Analog Input Pins:16
-DC Current per I/O Pin:40 mA
-DC Current for 3.3V Pin:50 mA
-Flash Memory:256 KB of which 4 KB used by bootloader
-SRAM:8 KB
-EEPROM:4 KB

—————————————————————————————————————

Package include:
►1 x RAMPS 1.6 Board
►1 x Mega 2560 R3 Board
►1 x 12864 LCD Display Controller
►1 x LCD Smart Adapter
►5 x DRV8825 Stepper

———————————————————————————————————————

►Note:
►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:))

Product Features

  • ✔️DRV8825 driver board widely used in 3D printers and small CNC machines. It is upgrade of A4988, 4-layer PCB for improved heat dissipation and decrease chip resistance. It suitable for driving below 8.2V ~ 45V 2.5A stepper motor, And had Six different stepping resolutions: full, half, 1/4 ,1/8, 1/16, 1/32.
  • ✔️12864 LCD: The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.6 board using “smart adapter” included. This panel connect your RAMPS 1.6, you do not need your computer, your SD card intelligent controller power supply. All further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller.
  • ✔️This kit includes a complete set of the most common and useful components that can be used by all tech-savvy people out there to build their own printer controller. A number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
  • ✔️Product Warranty: WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty. If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
  • ✔️Ramps 1.6 is optimized and launched based on Ramps 1.4 & Ramps 1.5. The Struture almost same as Ramps 1.5 , the difference is Ramps 1.6 have new 2pin connectors,which more simple and convenient to connect,also will not be burnt easily. And Ramps 1.6 have a good Heatsink above MOS tube in order to give a better function to heat dissipation. Beside, the Power of Ramps 1.6 is more larger than Ramps 1.5, the largest power will be up to or 270W, and Ramps 1.5 just can be samller than 200W.

Click Here If You Need More Detailed Info…