FYSETC Plastic Flexible Nested Semi Colsed Cable Drag Chain 10mm x 15mm Wire Cable Carrier Twist Chains for 3D Printer Parts CNC 3D Mini Electrical Machines Router Mill, 1M

FYSETC are professional 3D Printer Accessories manufacturer, focussing on every 3D Printer Parts, thank you for choosing us, if you have any good suggestion or need more help please feel free to email or QA us, we and our enginees will be happy to assist you.

Feature
Material: Plastic,
Total Length: 1 meter/ 39.4″
Color: Black
Net Weight:

Package includes:
1 x 10*15mm Cable Drag Chain Wire Carrier

Product Features

  • Used widely as a component and sevice parts in most 3D printer Reprap MakerBot Prusa i3 Creality CR10 Maker Select V2 Creator Pro Finder Wanhao i3 etc.
  • Suitable for using in reciprocating motion of the occasion, is able to built in cable, tubing, water pipes, etc.
  • Easy installation and repair, free movement, low noise, wear-resistant, high-speed movement.
  • Inner Size (HxW): 10 x 15mm
  • After Sales Guarantee: each one desfective item can have the free replacement or refund, if you meet any issues, please feel free to email or Q&A us, we will try our best to assist you.

Visit The Website For More Information…

RepRap MK3 Heatbed Heated Bed Heat Bed 3mm Aluminum PCB Board Heat Bed 12V/24V Dual Power for RepRap 3D Drucker Printer Prusa i3 with Thermistor & Wire

Overview
The Aluminum Heatbed MK3 have features similar to MK2 and you can also operate this board with 12V and 24V two voltage, more practical.
Heatbed with 3.2mm Aluminum Core. Print directly on the heatbed, no need for glass plate. It’s a much lighter solution than PCB heatbed + glass, which makes it better for faster prints. due to the aluminum substrate material is expensive, the cost of production is often ordinary glass fiber board is expensive, so the MK3 price is more expensive.
Please note the Aluminum Heatbed can have some marks or minor scratches, but it will only be of cosmetic character and will not affect the use adversely.

Features
(1)Dual power supply. Operate at 12V or 24V. You can use thinner wires when operating at 24V.
(2)A central mounting hole on the front side to allow for three point mounting. This is much easier for bed leveling in comparison to 4 point mounting. First level the side with two holes and fix in place, then level the side with one hole.
(3)Large solder pads for multiple wires (ribbon cable) or a SMD pinhead connector can be mounted.
(4)Pads for SMD thermistor 1206.
(5)With 15V on the 12V terminals will maintain approx. 115 degree Celsius without regulation.
(6)Running 24V on the 12V terminals will heat up the heatbed to 100 degree in only 2 minutes
(7)Your printer controller will regulate the power to the heatbed in order to get your preset temperature.

Specifications
(1)Material:Aluminum Plate
(2)Voltage:12V/24V
(3)Max Temperature:180 Degree Celsius
(4)Dimensions:214mm x 214mm
(5)Thickness:3mm
(6)Net Weight:400g
(7)Color:Black
(8)1 Layer 35μm (1oz base) Copper
(9)Resistance between 1.4 and 1.6 ohm for the 12V
(10)Resistance between 5.0 and 5.4 ohm for the 24V
(11)100 Degree Celsius possible for both 12V and 24V

Product Features

  • (1) Dual power supply. Operate at 12V or 24V. You can use thinner wires when operating at 24V.
  • (2) A central mounting hole on the front side to allow for three point mounting. This is much easier for bed leveling in comparison to 4 point mounting. First level the side with two holes and fix in place, then level the side with one hole.
  • (3) Large solder pads for multiple wires (ribbon cable) or a SMD pinhead connector can be mounted.
  • (4) With 15V on the 12V terminals will maintain approx. 115 degree Celsius without regulation.
  • (5) Running 24V on the 12V terminals will heat up the heatbed to 100 degree in only 2 minutes.

Visit The Website For More Information…

Jacana-Boutique – 3D Printer parts Fast Wire Connection for 12V/24V-40W/50W Ceramic Cartridge heater Heating Tube/thermistor 100k ntc 3950 end


Product Name:Fast Wire connector
· Rated Voltage : 400V
· Rated Impulse Voltage : 4KV
Description:
100% New, Never Used.
Contact material:phosphor copper
Wire Cross section:0.08~2.5mm2(
multi soft wire
), 0.08~4mm2(
single hard wire
)
Color:Grey+Orange
Rated Current:32A
Rated power: 7KW
Gauge:28~12AWG
Strip length: 9 – 10mm
Package:
2pcs/4pcs/10pcs/20pcs

Product Features

  • 100% Brand new and High quality.
  • Replacement, Repair parts and Printer accessories include: Machine, Hotend fittings, Mechanical Printer Spares, Electrical Printer Spares, Filament, Reprap, Hotends-Full Kits, Radiator, Aluminium Heater Block , Fixings & Structural , Hot bed. Cotton. Crepe Paper.
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service.
  • 90% conventional orders will be delivered within 15-25 days.
  • Please note that the products are only offered by Jacana-Boutique brand. Other sales people is not reliable.

Visit The Website For More Information…

3D Printer Aluminum Heated Bed 12V with Hotbed Wire Cable Line Hot Bed Size 220x220x3mm

Feature of heated bed:
1, the whole board full gold process, the cost is much higher than the spray tin plate!
2, the whole board after optical short circuit, open circuit detection.
3, heating table and aluminum substrate into one, better temperature stability.
4, the new circuit, power supply power stability.

Specification:
Product resistance: 12V voltage, the resistance of 1.2 ohms
Product voltage: 12V
Product Size: 220mm * 220mm * 3mm hole spacing 214mm
Product process: aluminum plate
Product color: black on the back, front on silver white
Product thickness: 3mm

Product Features

  • Size of hotbed: 220x220mm ( 8.6″ x 8.6″ square)
  • Hotbed With Cable Which be Installed Well
  • Working temperature: -62~235℃ (suggested )
  • Temperature: below 180℃
  • WARRANTY: All 3D printer accessories with 12 Months Warranty and Lifetime Technical Support.

Click Here For More Information