20 Sets Anti-vibration Rubber Landing Mat Feet, T Sliding Nut Block Square Nuts, M3 Screws with 1pc Wrench 3D Printer Accessories for 2020 Aluminum Extrusion Profile
Function: Anti-vibration, Anti-friction to protect the printer(when the printer is in direct contact with the desktop or the ground, it will be weared out.)
Quantity: 20 sets
T Nut M3:
Used for T slot 2020 aluminum extrusions
3D printer hardware accessories
Size: 10 * 10 * 5mm, Slot Width: 6mm; Thread Diameter: 3mm (m3)
How to install:
1.If you use in the 3D printer, which need the 4x Anti-vibration feet
2.Turn the YZ frame on the side and insert the antivibration foot inclined, then rotate the foot until you squish the rim inside the extrusion.
3.Repeat this process on all 4 feet. Place them 2-3 cm from the end of each extrusion.
20 * Antivibration feet
20 * 2020 T Sliding Nut Block Square nuts M3
20 * M3 screws
1 * Wrench
- High Quality! Made of rubber, strong and durable, long service life.
- Function: Shockproof, Anti-friction, to protect the printer.
- Used for T slot 2020 aluminum extrusions, 3D printer hardware accessories.
- .Package Contents: 20pcs anti-vibration feet, 20pcs 2020 T Sliding Nut Block Square nuts M3, 20pcs M3 screws, and a wrench as a gift for you.
- Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerHawk-US” and click “Ask a question” to email us! Looking forward to your consultation!
Detailed Information available on our Homepage…
No more burnt fingers for you!
This is a must have tool for changing print nozzles. Having the right tools makes all the difference in the world!
HOW TO REPLACEMENT NOZZLE
Step 1:Turn on 3D Printer, set nozzle temperature to target (PLA: 180-220, ABS: 240-280).
Step 2:After heat done, use SPANNER to hold heat block, use Socket screwdriver to screw old nozzle out. old nozzle will be very hot, don’t touch by hands!!!
Step 3:Put new nozzle to this socket screwdriver, spanner keep to hold heat block, screw nozzle in, must be tight and it is done.
Notice: NOZZLE and Heat Block on 3D printer need heat before take out, don\’t touch it by hands when printer is heading or close less than 10 mins.
21mm Wrench * 1pc
9mm Sleeve* 1pc
2 in 1 Screw Driver * 1pc
Screw Handle * 1pc
- No more burnt fingers for you! This is a must have tool for changing print nozzles. Having the right tools makes all the difference in the world!
- Compliant with 3D printer who has MK10 nozzle
- Special tools: special spanner and multi-function screwdriver can help you adjustment 3D Printer and change extruder nozzle more easy!
- You should heat heating block before Change or Assemble nozzle, otherwise maybe leakage
- Note: Screwdriver maybe rust, but No effect on use.
Click Here For More Information
WINGONEER 5PCS Aluminum GT2 Timing Belt Pulley 20 Teeth Bore 8mm Width 6mm and Wrench for RepRap 3D Printer Prusa i3
20T 8 mm bore aluminum GT2 timing belt pulley
Applies to 6 mm width belt
Two screws are provided for each synchronous pulley and already have been screwed in the pulley
Adopt high quality aluminum, excellently machined, Finished smoothly
Perfect choice for building a 3D printer or similar projects
Belt Width: 6mm
5 x WINGONEER Aluminum GT2 Timing Belt Pulley
1 x Allen Key
- 20T 8 mm bore aluminum GT2 timing belt pulley
- Applies to 6 mm width belt
- Two screws are provided for each synchronous pulley and already have been screwed in the pulley
- Adopt high quality aluminum, excellently machined, Finished smoothly
- Perfect choice for building a 3D printer or similar projects
Visit The Website For More Information…
3D printer nozzles drill Size: .2mm .3mm .4mm ( 2pcs ).5mm .6mm .8mm 1.0mm Painting Knife Set: A Good addition to your 3D printer equipment. They make easier and safer to take out printed pieces out of the printer table, reducing risk of damaging the piece. Useful – it also doubles as great cleaning tool for scraping off glue and various debris (with the aide of liquids like water and/or alcohol). Five pallete knives painting knives set with different blade shapes and sizes, which can exchange use and slide flexibly under big parts and save your time. Spanner: Easy to use, easy to carry.
- Printer Removal Accessories tools, Clogged Extruder Nozzles Unclogging Drill Cleaner (10 pack), nozzle removal wrench
- 3D Printing Tools: They are great tool to go with your 3D printer — the long, flexible blade is rounded, making it safer for kids, effective with large printed items, and minimizes damage to the printing surface.
- 3D Printing Tools: The different shapes makes it easier because of part variations.
- 3D Printing Tools:Material: stainless steel blade with wood handle
- Kit includes: 10pcs 3D Printer Nozzles Drill (0.2mm 0.3mm 0.4mm( 2pcs ) 0.5mm 0.6mm, 0.8mm, 1.0mm), 3D Printing Tools ( 3pcs), Spanner
Detailed Information available on our Homepage…