►This is The latest V6 kit, replacement parts is very easy, so you can easily upgrade your printer. High-quality stainless steel nozzle + copper heating block + TC4 titanium alloy, you can ultra-high temperature printing. Let’s try it :)))
►TC4 titanium alloy: TC4 titanium alloy material composition is Ti-6Al-4V, (a + b) type titanium alloy, It has good mechanical properties, specific strength. TC4 strength sb = 1,012MPa, density g = 4.4 x 103, specific strength sb / g = 23.5, while the specific strength of alloy steel sb / g is less than 18. Titanium alloy has low thermal conductivity. Titanium alloy thermal conductivity 1/5 of steel , 1/13 of aluminum, 1/25 of copper , TC4 thermal conductivity l = 7.955W / m.K. The above data is only for reference.
►Sensor heater block is the 2016 new V6 heater block, it compatible with PT100 sensor, size 23*16*12mm
►Copper heater block is The latest heating block, suitable for ultra-high temperature printing, size 22*16*11.5mm
►1 x High quality copper + stainless steel 1.75mm-0.4mm nozzle
►1 x High quality copper + stainless steel 1.75mm-0.4mm Volcano Sharp nozzle
►1 x High quality Standard V6 + Volcano +Copper heater block
►1 x TC4 titanium alloy + 4.1mm Bore Heat Break
►1 x V6 Aluminum alloy Radiator + PC4-01 Pneumatic fittings
►1 x Heatsink Shroud + High Speed 3010 Fan 12V 0.1A 9000±RPM
►1 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor
►2 x Allen wrench + 4 x Fan fixing screw
- Emergency Notice: Recently some customer feedback that V6 heat sink had the thread error, the heat sink in the kit is M6 thread, it can not be used. We are very sorry about this problem. This is our mistake. We apologize to all customers. If you have received a problem product, don’t worry. Contact us immediately, keep your product, we will re-send to you immediately for free. Thank you!
- TC4 Titanium alloy Heatbreak – Ultra-low thermal conductivity, Make sure the printer stable operation.
- 3 Models of heater blocks, upgrade your printer, experience the latest high-temperature printer technology.
- High quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
- Suitable use for Remote and 1.75mm Filament. With Heatsink Shroud + High Speed 3010 Fan, the fan 0.1A 9000+-10%RPM