WINSINN Chimera Hotend Extruder Full Kit – High Speed Volcano Upgrade + Sensor Copper heater block 0.4mm Copper & Stainless steel Nozzle For PT100 1.75mm Filament

►This is The Chimera Extruder Full kit, replacement parts is very easy, so you can easily upgrade your printer. High Speed Volcano Upgrade + High-quality stainless steel nozzle + all-copper heating block + TC4 titanium alloy, you can ultra-high temperature printing. Let’s try it :)))

 

—————————————————————————————————————

 

►TC4 titanium alloy: TC4 titanium alloy material composition is Ti-6Al-4V, (a + b) type titanium alloy, It has good mechanical properties, specific strength. TC4 strength sb = 1,012MPa, density g = 4.4 x 103, specific strength sb / g = 23.5, while the specific strength of alloy steel sb / g is less than 18. Titanium alloy has low thermal conductivity. Titanium alloy thermal conductivity 1/5 of steel , 1/13 of aluminum, 1/25 of copper , TC4 thermal conductivity l = 7.955W / m.K. The above data is only for reference.

 

—————————————————————————————————————

 

►This is the Sharp Volcano Nozzle for upgrade version. Nozzle Ensure Concentricity and Roundness.

►Copper heater block is The latest heating block, suitable for ultra-high temperature printing, size 22*16*11.5mm

 

—————————————————————————————————————

 

Package include:

►2 x High quality copper + stainless steel 1.75mm-0.4mm V6 nozzle
►2 x High quality copper + stainless steel 1.75mm-0.4mm Volcano Sharp nozzle
►2 x High quality Standard V6 + Volcano +Copper heater block
►2x TC4 titanium alloy + PTFE Teflon Heat Break
►1 x Aluminum alloy Heat sink + PC4-01 Pneumatic fittings
►2 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor
►1 x High Speed 3010 Fan 12V 0.1A 9000±RPM
►2 x Allen wrenc

Product Features

  • Can extrude 2 different filaments at the same time!
  • TC4 Titanium alloy Heat Break – Ultra-low thermal conductivity, Make sure the printer stable operation.
  • 3 Models of heater blocks, upgrade your printer, experience the latest high-temperature printer technology.
  • High quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
  • Made by WINSINN

Visit The Website For More Information…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “WINSINN Chimera Hotend Extruder Full Kit – High Speed Volcano Upgrade + Sensor Copper heater block 0.4mm Copper & Stainless steel Nozzle For PT100 1.75mm Filament”

  1. If you’re looking for the best Bowden dual extruder, this is it. It does not get much easier than this hotend system. The nozzles are really easy to get level, and will hold their level very well, even after crashing into the print bed a few times. This hotend system is much easier, and more compact than any other dual extrusion solution I’ve seen. It’s not too pricy either.This kit comes with a wide variety of blocks and nozzles to use for any application, in addition to the option…

Leave a Reply

Your email address will not be published. Required fields are marked *